Mary Kay Posted October 22, 2013 Report Share Posted October 22, 2013 I purchased my machine used about 3 months ago. The gal I bought it from had installed 2 new circuit boards as per the apqs techs. Now every time I turn the machine on the horizontal lock comes on also. I have installed the new MnM wheels on the carriage and the grounding wire. I don't think this is a normal thing. Has this ever happened to anyone else. Machine is a 2010 Milly. Link to comment Share on other sites More sharing options...
shirleyl Posted October 22, 2013 Report Share Posted October 22, 2013 Mine does it all the time. I just automatically check to see if it is on before I stitch. Shirley Link to comment Share on other sites More sharing options...
Tamarack Posted October 22, 2013 Report Share Posted October 22, 2013 Mine does that too but only about 25% of the time not every time I turn on the machine. No that is not suppose to happen. Link to comment Share on other sites More sharing options...
Gails Posted October 22, 2013 Report Share Posted October 22, 2013 After I had to change the circuit board both channel locks come on when I turn on the machine. I have wondered why as well. Link to comment Share on other sites More sharing options...
kloar Posted October 22, 2013 Report Share Posted October 22, 2013 My horizontal channel lock comes on each time too. Just got used to but wondered too. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.