bearlea Posted January 3, 2014 Report Share Posted January 3, 2014 I am hoping someone is online that can help me. I have been working on a quilt that needs to get done and although my quilt path is on my Milly shut down and won't turn on. I Have shut if all down but Milly won't come on. I have checked the surge protector and the plug all are plugged in. No power no light no nothing. Any suggestionis? Link to comment Share on other sites More sharing options...
ffq-lar Posted January 3, 2014 Report Share Posted January 3, 2014 Check for a blown fuse. The fuse cubby on mine is at the back, right side just above the cone holder for the bobbin winder. There should be extra fuses inside. Check your manual for location and how to open the drawer. Link to comment Share on other sites More sharing options...
Pam Smith Posted June 17, 2017 Report Share Posted June 17, 2017 I have the same problem, but I've checked and changed the fuse. Any other ideas? Link to comment Share on other sites More sharing options...
srichardson Posted June 17, 2017 Report Share Posted June 17, 2017 Hi Pam, Welcome to the forum. I don't know where you are located. If you are in Canada you will have two fuses rather than just the one in the US. Link to comment Share on other sites More sharing options...
Cagey Posted June 18, 2017 Report Share Posted June 18, 2017 Pam; Start from the power source and work you way to your machine. Is the GFI wall outlet popped, check to see if outlet powered using nightlight. Yes, then is power strip circuit breaker popped, check to see if strip powered using nightlight. Yes, do you have an extension cord to your machine, is there power at the end of the cord? Was the fuse you replaced good? Use a volt meter to ensure it is not broken, do an Ohms check; https://www.youtube.com/watch?v=1iHRESNMFAg All good and you only have one fuse, call APQS come Monday. They will have you up and running in no time. Cagey Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.