deanacly Posted January 7, 2014 Report Share Posted January 7, 2014 I am looking for a long arm quilting machine with frame. This is all new to me since I have recently started quilting. Someone has one for sale in my community and I was wondering if this was a good brand. Royal ken quilting machine. Link to comment Share on other sites More sharing options...
Johnmach Posted January 8, 2014 Report Share Posted January 8, 2014 Kenquilt, and the Royal model, was a good machine, although a few years old now. Keep in mind that Kenquilt is out of business at this point. Kenquilt was sold to S & D Stitches, the makers of Compuquilter, several years ago. S & D Stitches closed and tried to re-organize as Odyssey Quilting Machines, but were not successful and ceased operations several months ago. Nobody, that I know of, has heard of another company picking up either the Kenquilt or Compuquilter product lines, or support. Link to comment Share on other sites More sharing options...
jimerickson Posted January 8, 2014 Report Share Posted January 8, 2014 The KenQuilt Royal was a fine 26" (maybe it was 24") long arm. A friend has a Princess which is the smaller 22" version, and she loves it. They were made in both a stitch regulated version, and non-regulated version. Do you know which this one is? The stitch regulators on the KenQuilts were Intellistitch, which are outstanding, so support of the electronics should still be available. If it's unregulated, you could have an Intellistitch regulator fitted to it for about $3000, if you liked. The Royal came with an "M" bobbin system which gives you lots of bobbin thread. The tables were aluminum, and were quite satisfactory. As for repair of the rest of the machine, these are industrial quality machines, and not much goes wrong with them. I think you'd be able to get whatever parts you might need in the after market, so I wouldn't be afraid of one simply because they are no longer made. Edgerider makes wheels for them so that would take care of that need. If you like it, and can buy it reasonably, I can't think of any reason why you shouldn't. Jim Link to comment Share on other sites More sharing options...
deanacly Posted January 9, 2014 Author Report Share Posted January 9, 2014 Thank you for the information you both have provided it has been very helpful. It is a stitch regulated version and she was asking 3500.00 so I'm hoping that is a reasonable price. It looked like it was in really good condition and I liked the metal frame. The only downfall is it is 14ft... As I said earlier I am new at this so I'm looking to others for advise. Link to comment Share on other sites More sharing options...
jimerickson Posted January 9, 2014 Report Share Posted January 9, 2014 I'd say $3500 is a great price! My friend Suzie paid $6500 for her smaller Princess model, and felt like she was getting a great buy. A 14' frame is nice if you can fit it in, you can always use the extra length.. If you absolutely can't fit it in, I'm sure you could find a local fabricator/welder who could shorten it for you. Good luck. Jim Link to comment Share on other sites More sharing options...
bonway Posted January 14, 2014 Report Share Posted January 14, 2014 I no that this is off topic but i don't no where to post a new topic. Here goes i'm a newbie and have just gotten a ken quilt 622 and am doing my first quilt on it. I am looking to buy handles for this machine as it would make my work easier to see and do. I do relaize that the companies are out of business so i'm stuck.anyone out there can help me Bonway Just Getting Started 1 Link to comment Share on other sites More sharing options...
whitepinesquilter Posted January 14, 2014 Report Share Posted January 14, 2014 Bonway, hopefully you've posted on other quilting forums as well. What I'm wondering is if you couldn't contact a local welding shop in your area and see if they couldn't make some pretty generic entended handles for you. My machine has the straight up handles, not the ergonomic ones, so I actually added bicycle handle extenders to give me a longer reach. I don't know what kind of handles your machine has, but maybe you could also do something like this? Link to comment Share on other sites More sharing options...
Just Getting Started Posted April 25, 2017 Report Share Posted April 25, 2017 On 1/13/2014 at 10:43 PM, bonway said: I no that this is off topic but i don't no where to post a new topic. Here goes i'm a newbie and have just gotten a ken quilt 622 and am doing my first quilt on it. I am looking to buy handles for this machine as it would make my work easier to see and do. I do relaize that the companies are out of business so i'm stuck.anyone out there can help me Bonway If you still have this machine would you please contact me at. teesgirl45@yahoo.com Link to comment Share on other sites More sharing options...
jimerickson Posted April 25, 2017 Report Share Posted April 25, 2017 Just: This post is over 3 years old, and about a machine made by a manufacturer not represented on this forum, so I doubt Bonway will respond. That being said, I once owned a Ken Quilt 622. Mine was the long model - don't think they've made that particular machine for at least 10 years - and since then, I've owned 3 other machines. Does that tell you something? I sold mine on e-Bay 8 years ago for $650. The 622 is a Singer model type 96 industrial sewing machine set up for frame quilting. It's a heavy cast iron machine. I think mine weighed over 70 lbs. While you may be able to buy one very reasonably, I think you'd be better served saving your money and putting it toward a real purpose built longarm. An APQS Ult ll would be a much better choice if you're looking for an economical longarm system. In fact that's one of the machines I bought and I'm still using it today with both pride and satisfaction. As far as machine details for the 622 goes, I think a schematic for a Singer type 96 would probably do. Hope this helps. Jim MaryQuiltsTx 1 Link to comment Share on other sites More sharing options...
zeke Posted May 24, 2017 Report Share Posted May 24, 2017 For all your info. Ken Quilt has new owners in California just southeast of Sacramento. I'll try to find out who the new owners are soon. I'll have to dig up my client list and make a few calls. Zeke. MaryQuiltsTx 1 Link to comment Share on other sites More sharing options...
zeke Posted May 24, 2017 Report Share Posted May 24, 2017 By the way, Ken Quilt is a fine running machine. My first machine was a 622 and the crazy thing is still running strong with the new owner. I did revamp the track system before I sold it. The machine glides like glass and I also made the table a little more user friendly for us quilters. Zeke. Link to comment Share on other sites More sharing options...
Mary Hogan Posted March 24, 2020 Report Share Posted March 24, 2020 I just bought a long arm ken-quilt.used about 6 times by previous owner who died. It was bought in the 90',s. I am needing to learn more about it. Link to comment Share on other sites More sharing options...
Mary Hogan Posted March 24, 2020 Report Share Posted March 24, 2020 I live in Kansas Where could I find help to learn to operate this machine? Link to comment Share on other sites More sharing options...
Veronica Carr Posted February 12, 2021 Report Share Posted February 12, 2021 I also just bought a machine I have a huge 12 foot frame I am wanting the 6.5 foot frame without cutting it up. I want to take and ad a stitch regulation as well Link to comment Share on other sites More sharing options...
jimerickson Posted February 13, 2021 Report Share Posted February 13, 2021 Veronica: Which model do you have? Jim Link to comment Share on other sites More sharing options...
Janny Posted April 2, 2021 Report Share Posted April 2, 2021 I have found a Ken quilt princess machine. It hasn’t been used in a couple years. The owners daughter is selling for $2500 but before I drive how do I tell if it’s stitch regulated? Thank you for any help or advise Link to comment Share on other sites More sharing options...
jimerickson Posted April 6, 2021 Report Share Posted April 6, 2021 There will be a "box" on the front of the head. It will say "Intellistitch", or if a later model with Ken-Quilt regulator S-stitch or something similar. I don't remember what they called their version. There will encoders on the rails with wires running to the machine. Hope this helps. Jim Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now