Brandywine Posted March 18, 2014 Report Share Posted March 18, 2014 I changed the bobbin on a customer's quilt, and when I re-started, the head moves, but the needle is acting like I have the needle in the OFF position. I checked all the cables - all secure. I shut down everything and re-started. I have the motor on, the stitches per inch at 10, I can't think of anything else. Any suggestions for anyone will be REALLY appreciated. Kathy Tamosaitis APQS Milli CQ with belt drive Link to comment Share on other sites More sharing options...
zeke Posted March 19, 2014 Report Share Posted March 19, 2014 Hey Kathy. Try opening the black box at the back of the carriage. I have the cable system and this happened to me a couple of years back and I found out that one of the connection there had broken. Look closely and use a magnifying glass. Zeke. Link to comment Share on other sites More sharing options...
cmkeindl1 Posted March 19, 2014 Report Share Posted March 19, 2014 Call APQS too! (although Zekes help is GREAT!) Let us know what happens and good luck! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.