cnosburn Posted January 29, 2015 Report Share Posted January 29, 2015 I have had my quilting system in storage for over a year and am getting back to things. I started a pattern and had a problem with the machine and had to abort. Does anyone out their with a compuquilter know how to do this. I can't find it in the manual. Thanks, Carol O Link to comment Share on other sites More sharing options...
Johnmach Posted January 29, 2015 Report Share Posted January 29, 2015 Carol, what version of the software, and what version of the system do you have. I will look it up in my wife's manual. Johnmach Link to comment Share on other sites More sharing options...
Sue E. Posted January 29, 2015 Report Share Posted January 29, 2015 Carol, I no longer have a CQ but from memory, you need to go to the Restart page and tell the system where you need to restart. Find a node closest to where you need to restart and then move/nudge using the arrow keys to get to where you need to be. Mark your location and then tell it to sew. Good luck! Link to comment Share on other sites More sharing options...
quiltermidwife Posted January 29, 2015 Report Share Posted January 29, 2015 Dear Carol I read on the Intelliquilter forum over in Yahoo that they are now supporting Compuquilter owners Chris Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.