judyr Posted May 26, 2015 Report Share Posted May 26, 2015 This longarm was purchased in late 2011 and was hardly used the first two years as I was still working. The Crown Jewel has an 18 inch throat, built in vertical and horizontal channel locks, a laser(for pantographs), front and rear handles, a ruler base, horizontal spool pin, open toe hopping foot, thread mast, bobbin case, and uses size M bobbins. The 10 ft. Pearl frame has cloth leaders and side clamps which are included. The Crown Jewel has been serviced regularly by a Certified Babylock Technician. The Prostitcher is a 10 inch x 7 inch touch computer screen and is mounted on the front of the longarm. It has many features which include view, rotate, resize, repeat, crop designs, etc. It has the ability to establish a new start or stop point if thread breaks. You are able to set the quilting speed and the stitches per inch. It also includes many, many designs- blocks, triangles, edge to edge designs, borders,etc. I am VERY VERY ANXIOUS to sell as I want to upgrade to a larger longarm . I can help with disassembling the longarm, but the purchaser will need to pickup, transport, and set up the machine at their own location. Any questions, feel free to ask!! Price: Asking $14,900. REDUCED to $13.500!! Location: Near Tampa, Florida Contact: beadladyjr@aol.com Link to comment Share on other sites More sharing options...
judyr Posted June 1, 2015 Author Report Share Posted June 1, 2015 Bump!! Link to comment Share on other sites More sharing options...
Katydids Posted June 8, 2015 Report Share Posted June 8, 2015 Adding these photos of machine for Judy. Link to comment Share on other sites More sharing options...
judyr Posted June 17, 2015 Author Report Share Posted June 17, 2015 Bump!! Link to comment Share on other sites More sharing options...
judyr Posted June 23, 2015 Author Report Share Posted June 23, 2015 Bump!! Link to comment Share on other sites More sharing options...
Katydids Posted July 5, 2015 Report Share Posted July 5, 2015 Still available a great entry level computerized machine! contact Judy! Link to comment Share on other sites More sharing options...
judyr Posted July 6, 2015 Author Report Share Posted July 6, 2015 Bump!! Link to comment Share on other sites More sharing options...
judyr Posted July 15, 2015 Author Report Share Posted July 15, 2015 Bump!! Link to comment Share on other sites More sharing options...
judyr Posted July 30, 2015 Author Report Share Posted July 30, 2015 Bump!! Link to comment Share on other sites More sharing options...
judyr Posted August 7, 2015 Author Report Share Posted August 7, 2015 Bump!! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.