wonzey Posted February 1, 2016 Report Share Posted February 1, 2016 Help, Just bought a 2013 Lucey. She will run in SR mode, but not in manual mode. When I press the green switch on the handle (both front or back) she does nothing. Also when I press the white button she is very sluggish at making a stitch. In SR mode is seems like everything is working good. I do not have her threaded or a needle inserted. I am thinking I must be over looking something in the setup or maybe a relay gone bad. Any ideas??!! Link to comment Share on other sites More sharing options...
barbm Posted February 1, 2016 Report Share Posted February 1, 2016 Do you by chance have your stitch length/speed dial set all the way to the lowest setting? That would give the symptoms you're seeing. Link to comment Share on other sites More sharing options...
wonzey Posted February 1, 2016 Author Report Share Posted February 1, 2016 Barb, I turned the dial back and forth, thinking the same thing you just said. I did read that somewhere that is may not work if it is turn all the way on slow. The dial is very easy to move, is that normal? Thanks for your help. Link to comment Share on other sites More sharing options...
barbm Posted February 1, 2016 Report Share Posted February 1, 2016 Hmmm, easy is a relative term... sounds like you need to send an email to service@apqs.com - then give them a call tomorrow. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.