dickiesdarlin Posted November 14, 2016 Report Share Posted November 14, 2016 I have the turbo bobbin winder and am having problems with it. After bobbin is about half full the winder slows down to almost a stop without filling the bobbin.I have loosened the tension knob but it still slows down. I don't want to burn it out but don't know what to do besides loosening the knob. Any suggestions? I have used several different threads, So fine, bottom line, glide, all with same results. Thanks Jeanne Link to comment Share on other sites More sharing options...
iquiltit Posted November 14, 2016 Report Share Posted November 14, 2016 I just fixed that problem on mine. Unthread it. Put your thread through the top hole the take thread to the RIGHT then between the disks, to the LEFT and around back to the right again then put through the bottom hole. Then proceed to wind a bobbin. I am now able to tighten it all the way. Hope this helps. It certainly fixed mine. Carol Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.