kbaumbusch Posted November 15, 2016 Report Share Posted November 15, 2016 Has anyone seen this type of thing before? It's almost like it's trying to do a zigzag, albeit a very blunt one......I hope attached picture shows what I mean. Thanks, Kathy B. Link to comment Share on other sites More sharing options...
Cagey Posted November 15, 2016 Report Share Posted November 15, 2016 Is you thread routed under the fixed little finger just before the take-up arm that the thread runs under? I do not have my manual with me, so I cannot tell you the proper name. If so, I would completely rethread the machine. Link to comment Share on other sites More sharing options...
qltnbe Posted November 15, 2016 Report Share Posted November 15, 2016 Do I see bobbin threads pulling up to the top? Your tension might be way off. Link to comment Share on other sites More sharing options...
kbaumbusch Posted November 15, 2016 Author Report Share Posted November 15, 2016 I will rethread and see if it helps, thanks! Kathy B. Link to comment Share on other sites More sharing options...
sewingpup Posted November 15, 2016 Report Share Posted November 15, 2016 what kind of material is the quilt made of? From the photo it looks like it may be a looser weave? Don't know if that would make a difference with the stitches... Link to comment Share on other sites More sharing options...
iquiltit Posted November 15, 2016 Report Share Posted November 15, 2016 looks like top thread is too tight and bobbin thread needs to be tighter. Carol Link to comment Share on other sites More sharing options...
jimerickson Posted November 15, 2016 Report Share Posted November 15, 2016 I've seen them. I think there is a problem with your take up spring. Either it's not working properly, or your machine isn't threaded properly. Give it a hard look. Good luck. Jim Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.