Sheila S. Posted December 2, 2016 Report Share Posted December 2, 2016 I have had my Lenni for a year now and had some difficulties along the way. Most of my problems was the tension. I really had a lot of problem there and want to venture out in using different threads. I started using glide on the top and sofine in the bobbin and I really had problems getting the tension good so I tried using glide top and bottom and I did not not have the tension problems. My question for the day is, I want to use sofine in top and bottom and would like to know if this is a good idea and if not what am I getting myself into? Link to comment Share on other sites More sharing options...
RunningThreads Posted December 2, 2016 Report Share Posted December 2, 2016 So Fine top and bottom is our go to combination. All other combinations get referenced from there for example I run Glide about a turn and a half less tension. Nigel Link to comment Share on other sites More sharing options...
LisaC Posted December 4, 2016 Report Share Posted December 4, 2016 I use both Glide and So Fine #50 in both top and bottom and with each other in all combinations with no problems. Superior Threads has a lot of educational information on their website; check them out. Link to comment Share on other sites More sharing options...
judyday Posted December 4, 2016 Report Share Posted December 4, 2016 I have also found glide for top and so fine for bobbin is best combination for my sweet Georgia Link to comment Share on other sites More sharing options...
Sheila S. Posted December 4, 2016 Author Report Share Posted December 4, 2016 I tried the sofine on top and bottom, adjusted the tension and did not have any problems. I will try the glide on top and so fine on bottom again and try to get the tension right. Thank you all for your comments. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.