jgardog Posted December 29, 2016 Report Share Posted December 29, 2016 Blew a fuse when checking Crydom connection under top cover. I replaced it with a new one and still nothing. It's not a Canadian machine so I don't see any other fuses anywhere. Any ideas?? 2012 Freedom Link to comment Share on other sites More sharing options...
Bonnie in Ok Posted December 29, 2016 Report Share Posted December 29, 2016 Check the plug at the machine and the wall. Link to comment Share on other sites More sharing options...
jgardog Posted December 29, 2016 Author Report Share Posted December 29, 2016 Plug is tight. Outlet is good. Link to comment Share on other sites More sharing options...
Cagey Posted December 29, 2016 Report Share Posted December 29, 2016 When you say the plug is good, do you mean you tested with a night light or other device? If not, do that. If the plug is not powered check for a ground fault circuit breaker on another outlet which may control the one you use for you APQS machine. Also, if you use an extension cord, did the fuse on it possibly pop? Try another extension cord. Unplug the cord for the machine and replug. Ensure the fly wheel spins easily with your finger. Cagey Link to comment Share on other sites More sharing options...
jgardog Posted December 29, 2016 Author Report Share Posted December 29, 2016 I tried something else in the outlet and it is fine. Link to comment Share on other sites More sharing options...
Cagey Posted December 29, 2016 Report Share Posted December 29, 2016 Sounds like a call to APQS today then; 800.426.7233 Cagey Link to comment Share on other sites More sharing options...
RunningThreads Posted December 29, 2016 Report Share Posted December 29, 2016 I assume you used a slow blow type fuse, if not it will blow as soon as the motor starts. Nigel Link to comment Share on other sites More sharing options...
jgardog Posted December 29, 2016 Author Report Share Posted December 29, 2016 Sure did. There are a couple of arc marks on the power supply board that I see. I'm guessing now that maybe it fried. I have power completely through the switch itself. Link to comment Share on other sites More sharing options...
Bonnie Posted December 29, 2016 Report Share Posted December 29, 2016 Did you find the help you needed. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.