DClark Posted January 7, 2017 Report Share Posted January 7, 2017 Have installed the BLISS carriage on my Millie and the carriage does not move smoothly in either direction. What do I need to check? Link to comment Share on other sites More sharing options...
Sharon Deming Posted January 7, 2017 Report Share Posted January 7, 2017 First, check for lint and debris in the brushes. I had a similar problem - and cleaning the brushes worked. Oh, and clean the bliss rails really well. Link to comment Share on other sites More sharing options...
sewingpup Posted January 8, 2017 Report Share Posted January 8, 2017 HI, Sounds like you just installed Bliss? I would re-read and re-check every step of the install directions.....just to make sure you did not miss or miss understand a step....If that doesn't work, call APQS on Monday and they can help you problem shoot this...Lin Link to comment Share on other sites More sharing options...
HeidiP Posted January 8, 2017 Report Share Posted January 8, 2017 Is the carriage sitting on the rails with the bearings on either side of the rail? Could you have your channel locks engaged? Ask me why I ask. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.