rdp Posted July 9, 2013 Report Share Posted July 9, 2013 My Up/Down needle will not stop. I have taken off the left plate and there are no threads there. I don't know what to do next. Any suggestions? Link to comment Share on other sites More sharing options...
Primitive1 Posted July 9, 2013 Report Share Posted July 9, 2013 It sounds like a #8 screw adjustment is in order... Link to comment Share on other sites More sharing options...
TallPinesStudio Posted July 9, 2013 Report Share Posted July 9, 2013 Hello, There were some good suggestions in this recent thread: http://forum.apqs.com/index.php?/topic/32946-needle-updown-not-always-stopping/?hl=%20needle%20%20won#39;t%20%20stop I hope this helps. Good luck. Becky Link to comment Share on other sites More sharing options...
TallPinesStudio Posted July 9, 2013 Report Share Posted July 9, 2013 This is the link I meant: http://forum.apqs.com/index.php?/topic/32946-needle-updown-not-always-stopping/?hl=%20needle%20%20won#39;t%20%20stop Link to comment Share on other sites More sharing options...
rdp Posted July 9, 2013 Author Report Share Posted July 9, 2013 Thank you for your suggestions. I am going to go try the #8 screw now. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.