JeannieB Posted June 17, 2014 Report Share Posted June 17, 2014 What temperature setting do you use to fuse 911FF pelon to a tshirt back? And for how many seconds do you clamp the heat press down on the tshirt/pellon? do you use a different temperature/time for sweatshirts? just want to be somewhat prepared for my first attempt at using a heat press!!! thanks for your help! 8-) Link to comment Share on other sites More sharing options...
micajah Posted June 17, 2014 Report Share Posted June 17, 2014 Hi Jeannie, I use the 906fw1 inferfacing and my settings are 300 degrees F and time is 10 seconds. Debbie forgot your sweatshirt question....the one time I had to do sweatshirts, it took 2 tries, the second time after the shirt cooled down. Link to comment Share on other sites More sharing options...
BethDurand Posted June 17, 2014 Report Share Posted June 17, 2014 I set my press on high, and leave the clamp down until the alarm goes off. Never had a problem with anything not fusing. Link to comment Share on other sites More sharing options...
wreckser Posted June 17, 2014 Report Share Posted June 17, 2014 I also use 300 degrees, 10 seconds. Same for sweatshirts. Love the press! Link to comment Share on other sites More sharing options...
whitepinesquilter Posted June 18, 2014 Report Share Posted June 18, 2014 Mine will be anywhere between 310-325 for 10 seconds. Just love using the press with interfaced blocks Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.