Prairie Quilter Posted June 27, 2014 Report Share Posted June 27, 2014 Hi, I have a 2010 Millenium that has developed a problem. The first thing I noticed today was that when I used the needle up/needle down button it would frequently hesitate as the needle was moving down through the quilt, and sometimes would go up and down twice even though I only hit the button once. I moved the machine off to the side, unthreaded it and removed the bobbin, and then let it run in manual mode. That's when I realized that every couple of seconds the machine hesitates and then speeds up before resuming a normal, steady speed. I have turned it off, unplugged it, made sure all of the connections are firmly seated, and turned it back on - still the same problem. Does anyone have any suggestions about what could be causing this and how to fix it? I'm starting to feel queasy thinking about the twenty or so customer quilts that are waiting for me! Thanks in advance! Mary Link to comment Share on other sites More sharing options...
shirleyl Posted June 27, 2014 Report Share Posted June 27, 2014 It might be just tweaking the number 8 screw. Call Amy tomorrow and she will get you taken care of. Shirley Link to comment Share on other sites More sharing options...
Quilting Heidi Posted June 27, 2014 Report Share Posted June 27, 2014 Mary call APQS. It sounds to me like it is one of your boards that need replacing. Link to comment Share on other sites More sharing options...
Prairie Quilter Posted June 28, 2014 Author Report Share Posted June 28, 2014 Thanks, Shirley and Heidi. I spoke with Amy and she thinks the motor brushes need to be replaced. New ones are on their way and hopefully will solve the problem. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.