simplydivine Posted January 27, 2015 Report Share Posted January 27, 2015 How do I change the light bulb on my 2005 Millennium? I tried to "roll" it out (standing behind the machine). It didn't budge - - it looks like there are prongs on each end of the light bulb. I don't want to break anything.... advise please! thanks in advance! Julie K Link to comment Share on other sites More sharing options...
ffq-lar Posted January 27, 2015 Report Share Posted January 27, 2015 Stand at the front and hold your machine stationary with your channel locks. The prongs are seated in the fixture and will roll in only one direction. They roll out of position in a channel and then lift off easily. With the light off (it's hot!) reach under and roll the tube. I'm not in the studio and I can't visualize which way to roll. To put back, you have to find the same channel and roll it back until it seats in the fixture. It only works in one direction. I hope this helps. Link to comment Share on other sites More sharing options...
simplydivine Posted January 28, 2015 Author Report Share Posted January 28, 2015 thank you LInda R. for your reply. The key was standing in FRONT of the machine. Thank you so much. it came out easily and i was able to replace it with no problem. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.