blondequilter Posted September 8, 2015 Report Share Posted September 8, 2015 Long story short - I have a 2014 certified used Freedom. It has a M-bobbin. Due to some problems I was having, I have a L-hook assembly (sent courtesy of APQS) for Jim when he was here to help with my machine. He told me to hang onto it, in case I decided I wanted to change to an L if I was still having issues. I'm just wondering if I have to do anything special other than all the timing procedures & putting on the new hook. TIA! Link to comment Share on other sites More sharing options...
ThreadWaggle Posted September 9, 2015 Report Share Posted September 9, 2015 You just retime the machine using the L hook. So if you decide to change you are ready to go. That Jim is a nice guy. Link to comment Share on other sites More sharing options...
blondequilter Posted September 9, 2015 Author Report Share Posted September 9, 2015 Thanks! That's what I figured, but I wanted to make sure before I dove in! And, yes Jim is a very nice guy! He was very helpful! Link to comment Share on other sites More sharing options...
ThreadWaggle Posted September 9, 2015 Report Share Posted September 9, 2015 Thought it might be good to add, that what I told Blondequilter only works if you have a C stamped on your gearbox, which are the machines that were release when we started selling M bobbins. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.