Recommended Posts

My Mili was operating correctly...As I was starting to stitch the next row in the pantograph, I noticed the machine not working correctly. Had long stitches. I did a sample stitch off to the side.

Stitching in regulated mode it stitched correctly going vertically. I tried the horizontal movement next which did not work. I also did a test in manual mode and the machine worked correctly. I think that tells me something is wrong with one of the encoders. I have Bliss on my 2004 Mili. i did put a call into APQS so I am sure I will be contacted tomorrow. But does anyone have a idea what went wrong? Thanks! LInda

 

 

Edited by quilted cabin
I wanted to show more info

Share this post


Link to post
Share on other sites

Check to see if the rubber wheel on the encoder is turning when you move side to side.  Next unplug the connector for that encoder and plug it back together it might be loose.  I did have a broken wire right at the connector where it flexes all the time several years ago but Amy said it wasn't a common problem.

 

Nigel


Brenda Wells - Green Millie
Nigel Wells - Ultimate 1 with |Intellistitch & IQ

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now