GMALKB Posted January 6, 2018 Report Share Posted January 6, 2018 Is there an adjustment to the stitch length setting? Mine doesn't seem to be right.............I scroll up and down, but don't seem to get much change in length. Link to comment Share on other sites More sharing options...
dlnewell Posted January 8, 2018 Report Share Posted January 8, 2018 I know that there are some screws that can be adjusted on one of the circuit boards on the back of the machine but that should ONLY BE DONE WHILE ON THE PHONE WITH AMY OR ONE OF THE OTHER TECHS FROM APQS OFFICE. Quite a few years ago it seems my stitches weren't of consistent length and there was a measuring process I had to go through. I would first check to make sure your encoder wheels are making good contact and not slipping anywhere. (I also have the non-bliss system). Link to comment Share on other sites More sharing options...
Gator Posted January 8, 2018 Report Share Posted January 8, 2018 Linda, are in in stitch regulator mode? Which machine do you have? Link to comment Share on other sites More sharing options...
sewbizzie Posted January 11, 2018 Report Share Posted January 11, 2018 Another vote to give Angie or Amy a call. I had exactly the same problem, no matter where it was set, I seemed to get tiny stitches. Angie had me check my encoders for wear and proper adjustment (they needed to be adjusted), and then directed me to the circuit board and walked me through a couple of adjustments on the circuit board screws. it didn't take very long, plus Angie and Amy make it very easy - they have photos and instructions that they send to you so you know exactly what to look for. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.