Jamie.bennett@hotmail.com Posted February 5, 2018 Report Share Posted February 5, 2018 Hello all, When in stitch regulator mode the stitch length does not increase in size. The stitches are always small. When I select the stitch length increase button, they never change is size. Please advise. Thank you, Jamie Bennett Link to comment Share on other sites More sharing options...
RunningThreads Posted February 5, 2018 Report Share Posted February 5, 2018 Hi Jamie Just to confirm if you want longer stitches in regulated mode you must reduce the number of stitches per inch on the gauge. If this is what you are doing and you are not seeing any difference between the maximum and minimum settings call service at the factory and they can walk you through the diagnostics and get you fixed up. Nigel Link to comment Share on other sites More sharing options...
Jamie.bennett@hotmail.com Posted February 5, 2018 Author Report Share Posted February 5, 2018 I will call the factory. Thank you. Link to comment Share on other sites More sharing options...
connieb Posted February 5, 2018 Report Share Posted February 5, 2018 If you set your regulator at 10 stitches per inch and then make a big square starting at the upper left corner, then measure the stitches, this will help you decipher if one of the encoders is not functioning correctly. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.