alcote Posted June 5, 2018 Report Share Posted June 5, 2018 Why does my machine suddenly drag along the fabric. Almost like it hits an oil slick? Link to comment Share on other sites More sharing options...
Sharon Deming Posted June 5, 2018 Report Share Posted June 5, 2018 Is the dragging specific to a particular place relative to the frame? Sometimes, when I am quilting near the leveler bar, I feel a drag. Always it is because there is not enough slack in the power cable right at the machine and the cable catches on the back of the carriage. I must not have the little tie strap tight enough to keep the cable firmly in place, because eventually I will have to increase the slack again. Link to comment Share on other sites More sharing options...
Quilta93 Posted June 18, 2018 Report Share Posted June 18, 2018 Sometimes one of the cabinets under my table gets moved a little and my machine gets caught up a little and it drags. Deb. Link to comment Share on other sites More sharing options...
quiltmonkey Posted June 24, 2018 Report Share Posted June 24, 2018 My power cord is heavy and sometimes it hangs up on something (another cord, the carriage, etc) I try to pull the power cord out into the center of the table. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.