Leigh Posted June 19, 2013 Report Share Posted June 19, 2013 warm machine and needle up down doesn't always stop. help any ideas would be appreciated number 8 screw doesn't seem to make a difference. looks like fixed. then it doesn't stop Link to comment Share on other sites More sharing options...
Primitive1 Posted June 19, 2013 Report Share Posted June 19, 2013 I'd try calling APQS.... Link to comment Share on other sites More sharing options...
Busy Quilting Posted June 19, 2013 Report Share Posted June 19, 2013 The #8 screw needs to be turned clockwise to slow the needle down. It may be needed to turn it 1 to 2 full turns to make a difference. Link to comment Share on other sites More sharing options...
Leigh Posted June 19, 2013 Author Report Share Posted June 19, 2013 have done that it works then it doesn't Link to comment Share on other sites More sharing options...
lisata. Posted June 21, 2013 Report Share Posted June 21, 2013 I have the same with my Lucey, what helps is , if you switch the Stichregulator on I hate the bleeping, when I do start and stop, but to lock my thread I need the needle up/down Link to comment Share on other sites More sharing options...
DawnCavanaugh Posted June 22, 2013 Report Share Posted June 22, 2013 You may need to turn the screw well over two turns clockwise. Don't worry, it won't fall out. do this with the machine warm. Have you checked out our video on adjustment? http://apqs.com/instructional-videos/?vid=6tb0kLasBC8 If your machine is older than 2008 and the number eight screw is under the top cover, then use this video instead: http://apqs.com/instructional-videos/?vid=DQXtnehc2i4 Call if you still have issues! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.