All Activity

This stream auto-updates     

  1. Past hour
  2. I would like to purchase this machine call me at 618-658-0875
  3. Today
  4. Maybe a burr on the bobbin casing?
  5. Barb, I was talking directly to Dawn Cavanaugh who was talking with the Grace Company to get the answers for me. Yes, she mentioned that the hardware would be supported but that was basically it. When I had the QP, there were many hardware problems that were not getting fixed. Also, when the people in the group, tell you to send your design to the "sew page" and then go get a cup of coffee while the system works, I found this system to be far from useful. As I mentioned, I was one of the early owners and I would hope things have been fixed by now. I was also very discouraged when it was suggested that I would need to take a very expensive course - travel across the country, pay for a hotel, food, plus the course - to be fully able to learn and use the QP. I was up and being productive with my IQ in a matter of hours! I also suggested to Michelle that she compare the two systems and do more research. I love my APQS Millie, but didn't like the Quilt Path.
  6. Yesterday
  7. Here are a couple of responses from our QP users, Michelle: "I am not an expert but think that if the Surface Pro 3 came with QP it should run just fine. I thought I had a Pro 2, however when I looked it says it is a Pro 1, has 4 GB RAM, came with Windows 8, and I upgraded to Windows 10 during the free upgrade period. I do not have other software on the tablet and use it only for QP. I think that more RAM, along with a newer processor, will allow the software to run faster." "Not sure why the Surface wasn’t upgradable, but a faster system is worth it. I jumped from a Pro 2 to a Pro 4 and could definitely see the increase when using the program. So going from Pro 3 to a current Pro would also change the experience."
  8. You can ask here, not sure whether there are any techies that monitor this particular part of the forum. I've posted your questions on the QP forum and tagged three of our resident techies - will let you know what answers I get!
  9. Reason the Surface 3 isn't upgradeable - maybe it is technically possible but it depends on the amount of RAM. The current owner wasn't able to upgrade it. The specs on the Surface 3 indicate they came configured with either 2GB or 4GB RAM, not expandable because it is soldered to the board. 4GB RAM, that's pretty low for a modern OS and won't leave much available resources for any software - like Quilt Path - to run. 2GB: that upgrade isn't going to happen. I don't know which RAM configuration is on the 3 that is up for sale. Back to my original question: If I were to upgrade to a newer tablet with a faster processor and more memory - would that be helpful to improve my experience of QP? Or maybe the suggestion is I shouldn't even be asking the question here and instead try to find the QP forum?
  10. Michelle, I have been using Quilt Path since it first debuted in 2012, on Surface 2, 3, 4 and 5 tablets. There is NO reason that a Surface 3 tablet cannot be upgraded to Windows 10, it's just no longer a FREE upgrade, since the window (excuse the unintended pun!) for the free upgrade is well past - blame Microsoft for that one. Further, while the warranty for QP does not transfer to a new owner, the right to FREE software upgrades DOES transfer. I don't know who told Sue that she would have to pay a "hefty fee" for a software upgrade, it's just not true. And ongoing support for QP, no matter whether under warranty, continues the same. Yes, you have to be a QP owner to be a member of our QP Facebook Group, for the very reason that Sue mentioned - all she saw was problems. What she didn't explain (or perhaps didn't understand) is that, while a lot of "issues" pop up on that Facebook group, it's because it is our go-to platform for helping our owners, usually within minutes of them posting a problem. The overwhelming majority of our owners are happily quilting away and NOT posting on the FB group. While the FB QP Group is limited to owners, the APQS QP Forum here is NOT. Please check in there and discuss your concerns with current QP owners and those in "search" mode like you. You might also join the We Love APQS Facebook group - you can ask questions and speak with real owners there, as there is lots of overlap between that group and the QP group. All that being said, I strongly encourage you to try out both QP and IQ, compare costs and features, and make an educated decision. If you have any questions that I can help with, don't hesitate to email me at info@apqsnw.com.
  11. Wow! I bet it will win a ribbon. Just enter it into a few more shows!
  12. Fabulous Quilt! I usually enjoy quilting these because I know I will never piece one for myself. I applaud your ability to do both...piece and quilt.
  13. This is only my experience and opinion. Please do your own research. I had one of the older Quilt Paths with the older Surface Pro tablets installed on my Millie. I bought the QP from a dealer who used it as a demo. (I originally owned a CompuQuilter for about 9-10 years and was happy with it until the company went out of business). I found the QP was extremely slow and crashed constantly. If any dust or lint got onto the drive belts, the system wouldn't track accurately and I would spend more time trying to realign and ripping out stitches. Even though I was told by the dealer I wouldn't have any trouble updating to the new version and everything was transferrable to me and then a newer owner, when I actually tried to sell the QP I was told (by APQS and the Grace Co.) I would not be able to update to the newer version and neither would the new owner without paying a hefty fee. The warranty of the QP operating system/program was not transferrable. Another problem I had was the system needed to have the firmware updated constantly. It was a real hassle for me. Also, in order to find out more about using the QP and what problems people are having, you have to already own a QP to become a member of their Facebook group. I always wondered about that. Once I had my QP and was able to join the group. I found out the reason why. If I had learned about all the problems, I would never have purchased the QP - I really wasn't able to do all the research I should have done before purchasing my system. Don't always listen to what a dealer says - find out what real users are saying. About 4 years ago I finally was able to get rid of the QP and I purchased an IQ. I have no regrets and have been very happy ever since. I made a very expensive mistake in purchasing the QP. I am not familiar with the newer Surface Pro tablets and if the newer QP program was ever released, but I can highly recommend the IQ. Their support is amazing and updates are FREE. I also know that when I had the QP it was a real hassle to install designs because very few digitizers saved in the format that was required for the QP. Almost all digitizers save their files in the iqp format. The IQ can do more than the QP can do and does it easier and faster. Their Facebook support group is fantastic and anyone can join (check out Friends Using IQ). You don't have to own an IQ to join. Also, support from IntelliQuilter is wonderful. If I were you and was interested in the APQS machine, I would see if I could purchase the machine and not the QP. I would highly recommend you seriously look into the IQ. If you are being told that what you saw the system do was "pretty normal", you'll never be happy with it when you purchase it.
  14. Here are some photos. The machine is being sold because the owner is quite ill and no longer able to use the machine. In fact, it has been rarely used.
  15. Here are some photos. I’ve got other interested people too so please let me know your thoughts.
  16. Hi, I'm considering buying a machine listed here in the forums. I'm in touch with the owner. It has Quilt Path now and it's on a Surface Pro 3 which is so old it can't be upgraded to Windows 10. When I've used Quilt Path at the local APQS dealer's studio I've noticed it is incredibly slow and it's crashed and the response was that was pretty normal. I worry about this because it was a simple border to border pattern, not that dense, and the quilt was only queen sized. I assume the tablets in the studio are newer than 3rd Generation. So my question is this: if I decide to go ahead and purchase the used machine which is in wonderful shape, should I upgrade that Surface tablet to a newer one with a better processor and more RAM? I can afford this but will it help? A 6th Gen Surface with an i7 processor aand 16GB of RAM is $1700. Will throwing money at Quilt Path make it better? Or for those of you with IQ instead of QP does it make more sense for me to walk away from this machine and look at one without QP and buy IQ for it instead?
  17. I am having this same "random hard stitch" issue as well. Did you ever find the cause and a solution? Help please?
  18. Let your creativity flow from the Quattro 6000D. Employing InnovEye Technology, this Brother sewing machine allows precise needle placement thanks to the sensor-positioning sticker. This embroidery machine has a whole 10 inches of space on the right of the needle, up to 50 square inches of work-space, and a 23.75-inch long sewing bed for spacious and comfortable sewing. The 4.5 x 7-inch wide-angle high-definition LCD of this Brother sewing machine lets you design, view, and preview designs before implementing and repeating them. The three USB ports enhance connectivity. More than 600 embroidery designs are integrated in this embroidery machine so that you expand your horizons limitlessly. With the Quattro 6000D only the sky is the limit. Brother Quattro 6000d - with upgrades In fantastic shape, regularly serviced. Has been serviced. includes: Auto threader 15 sewing feet including 1/4 inch feet Hoops: 8x8, 12x8, 4x4, 1x4 Hard case for embroider arms and hoops 2 spool stand 1 operation manual =2 upgrade manuals USB cable Pre programed Disney designs Scan tablet, pen, magnets Flip Pal mobile scanner Brother card reader My custom design (embroidery) My custom stitch (sewing program) Next PE design program. (stand alone program) single foot control, knee lifter machine dust cover and few extras start you on your journey to create. BONUS: Steve Wilson Linda Windser of Anita Good Design signed this unit on 11/01/08 delivered in 4 different parcels. aprox 100 lbs total with all included. machine weights about 40lbs +110 thread kit (all different colors) with storage rack-----this is one of the boxes. Asking for $3000
  19. Last week
  20. Very lightly used Nolting MAQ14 with wooden stretch quilting frame. 14 inch quilting arm. Frame expands from 6 feet to 10 feet. Great machine for a beginner: non-regulated, easy to use, comes with paper and wood patterns. Asking $3000 OBO LOCAL PICKUP ONLY!!! Will not ship anywhere. Delivery available to Oregon, Washington for an additional fee based on mileage.
  21. Hi Caddyhomes, Sharon gave you some great advice. I read your part about "changing spools" and that might be part of the problem. Spools don't tend to work with evenly feeding off the thread. Cones work much better for the longarm machine. Of course, you can use spools, but it's a little trickier and requires a little more patience and tweaking. I tend to use the cones and never have issues with breaking. One thing I would suggest is to change your needle to a 4.0 or even a 4.5. That is a bigger hole and might give you a little more forgiveness with breaking thread. Good luck!
  22. I am Intrested in a precision pantograph if anyone has one for sale around southeast tx. Thanks
  23. I am Intrested in a precision pantograph system if anyone has one for sale, I have a tin Lizzie but I’m sure I can get what it needs if for different machine.
  24. Baby lock long arm with pearl table for sale like new front and back handles and laser 5,000 includes shipping jrogers54 @yahoo.com
  1. Load more activity