All Activity

2004 Millennium machine and frame. Refurbished in 2008 and has been serviced several times by APQS. Many extras included. Bobbin winder and several patterns. Machine located in WV. Selling due to death of owner. 5000.00$. Shipping by LTL carrier available. Any questions feel free to reach out. Michael Walker 304-731-8798 mikewalkerreff73@gmail.com

Is this family quilter still for sale? How much are you asking for the set up?

For sale 2003 APQS Millennium in good condition. 14 ft. table with light bar. Added Intelliquilter computerized system about 10 years ago so lots of designs included. I had APQS do a spa treatment in June 2023 so is ready to go. I have retired and am no longer interested in customer quilting. The table holds 2 rolls of batting underneath it. I'm asking $10,000 for it and my husband and I will help take it down and set it up within a 100 mile radius. The price is negotiable if we don't have to help set it up. We live in Marcus Iowa. I have pictures but don't know how to include them!

2016 Millie with Quilt Path and Hydraulics – $19,500 > 12′ Blissed Table with pre-installed zippers > Sets of extra zipper sets > Hartley Base Expander > 50 large spools of Glide thread > 4 boxes of Magna-Glide pre-wound bobbins > 3 extra bobbin cases > Magnetic bowl pin holder > Finger Mouse > Scoop Foot > 7 packages of needles > Aluminum bobbins and bobbin case tension gauge Located in Georgetown TX.

The Millie has been sold. Thank you, Gina

Yes $2,500. 2012 great condition I want a long arm machine. located in south Florida.

Yes, this is still available, feel free to call or email me with any more questions 518-222-6363 or spencerhatman@gmail.com.

Is this machine still available?

Is this still available, sent you an email

Hi do you still have this for sale?

For sale a 2003 APQS Millennium with a 14 foot original table. I added an Intelliquilter about 10 years ago so has lots of designs. I had a spa treatment done on it in June of 2023. So runs very well. This includes a light bar. There is a bar under the table that holds 2 rolls of batting. My husband and I would help take down and set up the machine within a 100 miles. I have pictures but don't know how to include them yet !I'm asking $10,000 but will negotiate if we don't have to help set up the machine. I retired and am no longer interested in running as a business. We live in Marcus, Iowa.

For Sale a 2003 Millennium with a 14 foot table. I bought it new and added the Intelliquilter about 10 years ago so lots of designs. The machine had a spa treatment at APQS in Carroll in June of 2023. Overhead wiring included. Runs very well. I retired and am no longer interested in perusing it as a business. My husband and I would help take it down and set it up within 100 miles. The machine has the older table with a bar underneath that holds 2 rolls of batting. I would like $10,000 for the machine. Will negotiate if we don't have to set up the machine. We live in Marcus Iowa. I will add pictures if I figure out how to do that.

APQS Lucey with V5 Quiltpath, bought new in August 2021. 12ft standard table. No bliss or hydraulics. Comes with hartley base, rulers, 12 cones of glide thread, L glide bobbins. Located in Hudson, NY. I am willing to deliver within several hour radius. Asking 20,000. Please email me- Morganotty82@gmail.com

2013 Millennium with Quilt Path. Moderate use and very well maintained. $13,500. Located in Northeast Kansas. Call or text (785) 766-1969. Includes: Stitch Regulator, 12’ Deluxe Table with Bliss Automatic Fabric Advance Horizontal and Vertical Channel locks Bobbin thread cutter Quick Change Foot system with 1/4” Hopping Foot & Scoop Foot Overhead lighting system Bobbin Winder and L size bobbins Quick Zip system and Red Snappers for quick loading UPS (electrical standby unit) Miscellaneous extras

Thanks, Jim. The table was not square, and you are right - I had to loosen the bolts and "force" it to square it up. Thanks!

Are you talking square or level? If it's square, then your frame is "racked" and needs to have the long corner pushed toward the short corner. I don't know exactly how your frame is made, but I'd guess by loosening the bolts holding it together and forcing it toward square, then tightening the bolts, would do the job. You can check squareness by measuring diagonally corner to corner. Your table will be square when the two measurements are exactly the same. If you're talking about level, then adjusting the height of the individual legs should do the job for you. Good luck. Jim

I'm no expert on robots, but I think Intelliquilt has a kit that will fit your machine. I've been told that as long as your APQS has horizontal wheels it can be fitted with an Intelliquilt robot. Jim

I don't use SoFine nor Omni, just YLI Longarm Professional and Bottom Line, but I've found size 100 and 110 serve my needs. Actually I use 100's more now than I ever did while using MR type needles. The Schmetz SERV 7's have a different needle body that makes them stiffer, so a smaller needle can be used without the corresponding deflection usually associated with that size. (I think Schmetz advertize one needle smaller because of the design). The eye design is intended to provide a larger loop which will reduce missed stitches. I'm sure you will like them. Jim

2013 Used Millie has a 26" throat with 12' white Bliss table with an "M" bobbin and a Motorized Fabric Advance with Quilt Glide, Leadergrips, Low Bobbin Indicator, Top Thread Break Detection, Horizontal and Vertical Channel Locks, Interchangeable Hopping Foot with Ruler Foot, LED Lighting with Built in Black Light, Single Stitch Button, Needle Speed 3500 SPM and Laser Stylus. Also included is quite a bit of thread and several pantographs. Located 30 minutes from Paducah. This machine was purchased from Angela Huffman in 2018 and was used as her personal machine. I have quilted 6 quilts since I bought it so hardly used since then! It has been appraised at $7,000 and I will price it at $6,700. You will be responsible to disassemble. I have the original box it came in. If interested please email me at ginaterry458@gmail.com Thank you, Gina Terry

APQS Millennium with 12 FT Frame, includes channel locks, manual, and more. $4,995 - located in Lancaster, PA.

I have a 2016 lennie with bliss wondering if I can get computerized quilting for him

Something seems off with my Bliss table. Today I used a laser level to check it a from a few different spots, and it seems that the table is "unsquare" by about 3/8" to 1/2" from one end to the other. I can't find any instructions or guidelines on how to remedy this. Any suggestions? Thanks!

Thank you Jim for your in depth discussion about the Schmetz Serv 7 ball point needles. I happened to stumble upon a Facebook post about Schmetz ball point needles for longarms today. I had never heard of them before. I have occasional trouble with skipped stitches on my 2019 Lenni, so I ordered six packs in sizes ranging from 14 to 21. I can’t imagine what type of thread would need a size 21. (The packs are $4.80 each and I saved $10 on shipping by ordering that many.). Hopefully I won’t need to adjust the timing. 🤞 Which sizes do you recommend for SoFine and Omni? Jill

Yes Sir. I have been put in touch with someone who might can do this. I was hoping not to as I'm certain to end up with a larger work space. Looks like it could be my only option. Again thank you for suggestion Grammie Tammie

Working on both… and maybe open toe also