Jump to content


Popular Content

Showing content with the highest reputation on 08/01/2021 in all areas

  1. Sue: I checked the wheels on my Ult 2 yesterday. The OEM wheels have an effective diameter about 3/16" larger than the Edgerider Gammill set. I say "effective" because the profile of the wheel face is different, and depending what type rail they run on, they will sit higher or lower. Since the change is for each set (machine, carriage), the total height might be as much as 3/8" I think on your rails, it would be less than that. On my rails, I think the difference was about 3/8", but I can't really remember, and can't tell from just looking at the wheels. If you're willing to risk the cost of the Gammill Edgerider set, I think they will work on your set up. In addition to the wheel set, you will need to replace the wheel mounting bolts. The bolts that comes with the Gammill set are are metric, while the bolts on your Lenni are imperial (or at least they are on my Ult 2). The hub of the Edgerider wheel is just over 1/4" thicker than the OEM wheel, so you'll need to buy 8 bolts each a quarter inch longer than the original. ( I don't remember if they are all the same length or not). The bolts are standard 1/4 x 20 so most any hardware store should stock them. The Edgerider wheels are two row bearing wheels with a significantly wider base which makes them much more stable and durable than the OEM wheels. You will notice the difference when they are installed. The precision of my quilting improved significantly when I put them on my Ult 2. It also improved noticeably on my Gammill Classic when I installed a set on it. (having the two machines is how I became familiar with the Gammill designed set) I'm curious, so risking the purchase price of a set of aftermarket wheels wasn't a problem for me. In fact, after I fitted my Gammill with Edgerider wheels, I replaced them with another brand of aftermarket wheels. Not much difference, but both aftermarket sets were much better than OEMs. Hope this helps. Jim
    1 point
  • Create New...