RunningThreads
-
Posts
1,282 -
Joined
-
Last visited
-
Days Won
106
Reputation Activity
-
-
RunningThreads got a reaction from dbams in In search of Gammill Feet
Lorri
Maybe you could wrap a couple of turns of electrical tape or similar around your hopping foot to increase the diameter to the true half inch. It would be an inexpensive fix until you find the exact feet you are looking for.
Nigel
-
RunningThreads reacted to SueD in How I can get images for my wallpapers
You post appears to be spam. This is a quilting forum - not toilets.
-
-
-
RunningThreads reacted to Janice H in Timing?
I hit the backbar with machine & needle down. Didn't hurt the quilt but couldn't move the needle. We got the book out(that came with the machine) and had no problem timing the machine. The instructions are good. Machine works great now.
-
-
RunningThreads got a reaction from dbams in Is My Towa Gauge Working Correctly?
Sorry I’m late to this conversation. If this is happening with full bobbins it could be they are slightly too full or egg shaped and rubbing on the side of the case. Quite often I would have to pull off a few yards until the tension ran smooth. I guess a bent bobbin case would also cause this.
Nigel
-
RunningThreads got a reaction from dbams in Check spring
Yes that check spring does need changing occasionally. It will get a groove worn in it just like the pigtails but not nearly as often. The check spring’s job is to prevent the thread from getting wrapped around the needle. It does this by taking up any free play between the tension and the needle when the needle is out of the quilt. Some will disagree but it really should have no effect on tension unless the thread is snagging on the spring. Have someone record the thread path with your cell phone camera as you are quilting. When you review you may see your problem is further up the thread path, not feeding off cone properly, first guide not centered over cone, thread not inserted fully in tension discs etc.
When you find your solution please post back. It will help someone in the future.
Nigel
-
RunningThreads reacted to Cagey in Anti fatigue mat
Gerald,
You do understand the post if over 10 years old. Plus, Matt; the individual you quoted, has not visited the forum since 2016.
If you hover over the poster's name you can see when they last visited the site.
If you do an internet search for "anti-fatigue floor mats" you will find a number of possible solutions.
Best of luck shopping.
Cagey
-
-
-
RunningThreads got a reaction from dbams in Broke needle
Linda always give good advice. Here is a link to the timing video.
Nigel
https://www.apqs.com/timing-apqs-machine-video/
-
RunningThreads got a reaction from dbams in Getting customers to my website
I apologize if I’m wrong but looks like spammers talking to each other.
-
RunningThreads got a reaction from quiltmonkey in Which threads do you have a love/hate relationship with?
Spam reported
-
RunningThreads got a reaction from Bridgette in SOLD - Babylock Jewel and Grace Pinnacle Frame
Bridgette
Quiltlover hasn’t been here since July 26th. Click on her name and send a private message and it will go to her email.
Nigel
-
RunningThreads got a reaction from barbm in Lucey Bliss lubrication
Probably a little light for motorcycle chain but definitely bicycle chain and cables.
Tri-Flow superior is commonly used in the vintage sewing machine community. It is a very light viscosity oil that also helps soften up and flush out the years old oil that has turned to gum. It would work fine in our machines but my understanding is the PTFE will not pass through the wicks. So since you need the regular sewing machine oil for the wicks, why bother having two products when one will do. Now if I was servicing one of our machines that had been sitting for a few years I wouldn’t hesitate to take off the side cover and give the mechanicals a good soaking with Tri-Flow.
Nigel
-
RunningThreads got a reaction from Kim K in 2003 APQS Millennium for sale
Kim
The quickest way to contact anyone on most forums If they didn’t post an email or phone number is to click on their name on the left side and from that page you will find a button to send them a message. That will go immediately to their email as it doesn’t look like Catherine has been on site in many months.
Good luck with your search.
Nigel
-
RunningThreads got a reaction from quiltmonkey in Robyn
Connie
I think you are thinking of zeke. Robyn click on the envelope icon at the top of the page and send a message to zeke I think he is the most knowledgeable Computer-Quilter person here.
Nigel
-
RunningThreads reacted to katquilter in Needle hitting
Hi - Thought I would update - I spoke with the Amazing Amy and it might be I can just do a belt adjustment ! She sent me videos, and once I find Allen wrenches and do a little Yoga to slow my heartbeat down, I'll be doing this chiropractic adjustment on my machine …
-
RunningThreads reacted to Cagey in Needle hitting
Kathleen,
Your post is somewhat confusing, as it sounds like the entire needle feel out when you first hit the ruler. Is this correct? I would have thought the needle would have broken, and part of the needle fell onto the quilt. Though your sentence above would indicate the entire needle feel out.
With your needle first hitting the ruler and then having it fall out multiple times, you have had ample opportunity for your machine to come out of time. Thus, I would suggest you watch the APQS timing videos,
Tools needed https://www.youtube.com/watch?v=2u4RgOAeSJ0 4:30 magnifier to see the hook assemble and diagnose problem
https://www.apqs.com/introduction-timing-longarm-quilting-machine-recommended-tools/
Steps https://www.youtube.com/watch?v=xWeqiuvwk5E
https://www.apqs.com/timing-apqs-machine-video/
After watching the videos, I would suggest with a needle installed watch what the needle is striking when it is lowered. Have someone turn the hand wheel slowly while you watch the needle descend with a bobbin both not installed.
Once you know exactly what the needle is hitting, you can better determine what needs to be done to get your machine working. Give APQS a call after you know what the needle is hitting, and they can steer you in the proper direction.
Best of luck with your repair.
Cagey
-
RunningThreads got a reaction from mkc in UPS for Lenni
The main power fuse on a Lenni is 3.15 amps which is the equivalent of about 400 watts. You want a unit with zero delay and that is what dual conversion will give you. Not to say you can’t get zero delay without dual conversion. I’m not sure if the Lenni will tolerate a delay switching to a backup but I know the Millennium won’t. If you are quilting along and the power goes out there is an excellent chance the needle is in the fabric, you will tear the quilt. In my opinion buy the smallest dual conversion back up, you just need it to keep the machine running until you can stop moving.
Just my two cents
Nigel
-
RunningThreads reacted to JustSew in 3 at once
I mounted 3 baby quilts at once. I used the same length of backing fabric for all 3 but used different battings. Used my faithful 2002 Millenium.
-
RunningThreads got a reaction from quiltmonkey in Man Quilter
Man quilter is Matt Sparrow. He had a blog for a few years and some videos under that name. It looks like the manquilter.com site has gone dormant but the Sparrow Quilt Company is still going strong. Here is a video that may be what you are looking for. Leader grips and red snappers are the same principle.
https://youtu.be/yx5mXoHwvuw
Nigel
-
RunningThreads got a reaction from aktbone in Attaching binding by longarm
We never used the channel locks when applying binding, we used the edge of the hopping foot as a guide. Also if someone was going to show or have the quilt judged we wouldn’t apply the binding.
Nigel