Jump to content

Gails

Member
  • Posts

    27
  • Joined

  • Last visited

Everything posted by Gails

  1. I have been using the PPS since yesterday on a queen size quilt and I have to say that I couldn't be more pleased with the stitch out. I haven't had a lot of experience with Pantographs but what I did have I was not happy with. Standing up and trying to stitch the pattern out just didn't work for me, for the 1st time I am actually having fun, and liking the results, using this system.
  2. I just received mine today and hope to be up and running tomorrow. I found out that I will have to raise my leveler bar a little. I can't wait to try it out. I gave up on pantographs because I just couldn't do them. Gail
  3. I just had this problem, SR would not work side to side. Fortunately I have a Bliss table that is still under warranty so APQS sent me the back axle with the encoder attached and that fixed it. I know that you can get the parts to fix the encoder cause that was what I would have done. It can be fixed call APQS
  4. Thank you, I took off the needle plate and did find a small burr right on top of the hook assembly. Gently buffed that out, hopefully that will fix the problem.
  5. Hi I have been having bobbin thread breaking a lot, sometimes 5 times or more with one quilt. I clean the bobbin area as the manual says. When the thread breaks it gets caught between the silver finger and the black basket in back. When it happens I clean with WD40 and then oil. I may get one full pass and it breaks again. It's not tension, the only thing I can think of is a burr. Can someone help please? How do you check for burrs in the hook assembly?
  6. Gails

    Help Please

    After I had to change the circuit board both channel locks come on when I turn on the machine. I have wondered why as well.
  7. Thank you so much, I am so looking forward to this class. I love wholecloth and can't wait to learn. I am thinking to go with the 70 x 70. Do you think that is to large for a 1st time.
  8. Can someone give me some advise on what size rulers to take to Karen McTavish whole cloth class at MQX. Especially the t square. I am gathering the stuff I will need for the class and was wondering what size t square to get. Where is the best place to find one? Thanks for your help. Gail
  9. Thank you, thank you. Someone else had mentioned adjusting the stylus but I couldn't see how to do that. I will try that and let you all know. Everything else is exactly how the instructions say,
  10. Thank you, thank you. Someone else had mentioned adjusting the stylus but I couldn't see how to do that. I will try that and let you all know. Everything else is exactly how the instructions say,
  11. Oh my gosh, that's what I get for not paying attention. Thank you for getting back to me.
  12. Oh my gosh, that's what I get for not paying attention. Thank you for getting back to me.
  13. Thank you.When we installed the wheels I used the directions that i downloaded from Katydids. I thought I used the number of washers in the instructions so I was surprised that the stylus wouldn't go into the grooves. How many washers do any of you have on your wheels.
  14. Thank you.When we installed the wheels I used the directions that i downloaded from Katydids. I thought I used the number of washers in the instructions so I was surprised that the stylus wouldn't go into the grooves. How many washers do any of you have on your wheels.
  15. Thank you.When we installed the wheels I used the directions that i downloaded from Katydids. I thought I used the number of washers in the instructions so I was surprised that the stylus wouldn't go into the grooves. How many washers do any of you have on your wheels.
  16. Thank you.When we installed the wheels I used the directions that i downloaded from Katydids. I thought I used the number of washers in the instructions so I was surprised that the stylus wouldn't go into the grooves. How many washers do any of you have on your wheels.
  17. Hi everyone, I am hoping someone can give some ideas what to do. I installed my edgerider wheels and now everything is so much higher that the original wheels the stylus for my circle lord won't go down far enough to fit in the grove. Can someone give me an idea where I went wrong. I see a lot of you have ER wheels and circle lord without any problem. Thanks in advance
  18. Hi everyone, I am hoping someone can give some ideas what to do. I installed my edgerider wheels and now everything is so much higher that the original wheels the stylus for my circle lord won't go down far enough to fit in the grove. Can someone give me an idea where I went wrong. I see a lot of you have ER wheels and circle lord without any problem. Thanks in advance
  19. How does the payment plan work? Does your order have to add up to equal $92 a month for 18 Months?
  20. How does the payment plan work? Does your order have to add up to equal $92 a month for 18 Months?
  21. I was also at the road show in Lake Oswego to try out the Bliss. I have Edge Riders on my Millie and wanted to see if there was a big difference. I have to say that I really didn't feel a lot of difference in how the Bliss felt to the ER's. However, I really like the look of the new table. But I won't be changing over for just the table. Can't justify $3000, at least not right now, to change the table over.
×
×
  • Create New...