NollR

I just reset my machine back up to see how it's still working and used it for a few quilts, no issues. It is still available for the right price and for pick up only.

2007 Lenni for Sale with 10 foot table and EXTRAS! $5,000 OBO I'm the 3rd owner for this machine. I bought it near the end of 2010 from a lady in Boyertown, PA. She bought it to use it for personal use off a lady who bought it new from APQS to start a business I believe which didn't happen. She sold it because it was too much for her and she needed the room. I know she told me she had it serviced by the PA APQS rep before selling it to me. . I had 2 or 3 people who took lessons on it with me, but then never rented time on it. So I have used it for some quilting while I had others on my large frame. It has been well maintained and used by me for maybe a few dozen quilts. I bought this machine as a second machine ( I have an older Milie) with the intention of starting a long arm rental business in a rented place. That never worked out in this area. I had 2 ladies take beginning lessons on the machine (where I was with them continually) but then never had anyone rent time on it. So I used it to work on quilts the few days I was at my store since I use my Millie for everything. After I closed my store in the fall of 2013, I set the machine up at home in case I got custom quilts that needed to stay on my larger frame for a time so that I could work on other quilts. I did use it a bit, but not enough to warrant keeping it (a dozen or so quilts at the most). It has always been in a place where it was heated and air conditioned. I maintained it and oiled it when used. The past year especially it has not been used as I have been dealing with breast cancer since the beginning of the year. now that I'm getting back to somewhat normal and starting to get back to work, I realized that it's better to sell this machine to someone else. You can look on the APQS website for the specs on the machine which is close to my machine. I know they changed the handle design. I know I have an original brochure and picture somewhere that I can take a picture of and send to you if you like. I did update the table and carriage system sometime in 2011. The current table is black with one piece rails and an IQ carriage system. I didn't want to spend $3,000 to upgrade to the Bliss table and system and this was a less expensive alternative. It runs smoother that the original table and I haven't had problems with it. When I closed my store and disassembled it, I set it up in my family room (first picture, machine on the left). I then took it down for space and later reset it back up in a spare room ( second picture). Then my son moved back in temporarily after college and down it came again. Now I don't want to reset it back up since I mainly use my large machine for the little quilting I still do. $5,000 OR BEST OFFER! Elysburg, PA FOR SALE APQS 2007 Lenni longarm quilting machine This is my SECOND long arm machine. For those of you that remember my store, this is the machine I had set up there. It is just sitting, having taken it apart last May after being reset back up in my home. It's a shame because it is a wonderful, high quality machine for someone. It is on a 10 foot table and includes extras such as the base for doing ruler work, zippered leaders with extra sets for quilts, a new brake system, horizontal spool holder, micro drive handles, extra bobbin cases and bobbins. The pictures show the last quilt I quilted on this machine and the machine on the left when it was set up in another room. I'm asking $5,000 or best offer PICKUP ONLY. If you have any other questions or interest, please contact me through here or the following: rosenoll2008@gmail.com 570-259-2008 (please leave a message as I get way too many junk calls any more) Thank you! Edited February 20, 2019 by NollR I provided additional information. 1 ORNurse56 reacted to this Quote Edit Roseann M. Noll Phoenix Rose Quilts Elysburg, PA Pellon Legacy Regional Long Arm Batting Distributor Check me out on Facebook under Phoenix Rose Q

Hi, Yes, it is still available and waiting a new home!!

Hi All, It's time to sell my second long arm machine. I'm the 3rd owner for this machine. I bought it near the end of 2010 from a lady in Boyertown, PA. She bought it to use it for personal use off a lady who bought it new from APQS to start a business I believe which didn't happen. She sold it because it was too much for her and she needed the room. I know she told me she had it serviced by the PA APQS rep before selling it to me. . I had 2 or 3 people who took lessons on it with me, but then never rented time on it. So I have used it for some quilting while I had others on my large frame. It has been well maintained and used by me for maybe a few dozen quilts. I bought this machine as a second machine ( I have an older Milie) with the intention of starting a long arm rental business in a rented place. That never worked out in this area. I had 2 ladies take beginning lessons on the machine (where I was with them continually) but then never had anyone rent time on it. So I used it to work on quilts the few days I was at my store since I use my Millie for everything. After I closed my store in the fall of 2013, I set the machine up at home in case I got custom quilts that needed to stay on my larger frame for a time so that I could work on other quilts. I did use it a bit, but not enough to warrant keeping it (a dozen or so quilts at the most). It has always been in a place where it was heated and air conditioned. I maintained it and oiled it when used. The past year especially it has not been used as I have been dealing with breast cancer since the beginning of the year. now that I'm getting back to somewhat normal and starting to get back to work, I realized that it's better to sell this machine to someone else. You can look on the APQS website for the specs on the machine which is close to my machine. I know they changed the handle design. I know I have an original brochure and picture somewhere that I can take a picture of and send to you if you like. I did update the table and carriage system sometime in 2011. The current table is black with one piece rails and an IQ carriage system. I didn't want to spend $3,000 to upgrade to the Bliss table and system and this was a less expensive alternative. It runs smoother that the original table and I haven't had problems with it. When I closed my store and disassembled it, I set it up in my family room (first picture, machine on the left). I then took it down for space and later reset it back up in a spare room ( second picture). Then my son moved back in temporarily after college and down it came again. Now I don't want to reset it back up since I mainly use my large machine for the little quilting I still do. $6,000 Elysburg, PA FOR SALE APQS 2010 Lenni longarm quilting machine No, I AM NOT going out of business. This is my SECOND long arm machine. For those of you that remember my store, this is the machine I had set up there. It is just sitting, having taken it apart last May after being reset back up in my home. It's a shame because it is a wonderful, high quality machine for someone. It is on a 10 foot table and includes extras such as the base for doing ruler work, zippered leaders with extra sets for quilts, a new brake system, horizontal spool holder, micro drive handles, extra bobbin cases and bobbins. The pictures show the last quilt I quilted on this machine and the machine on the left when it was set up in another room. I'm asking $6,000 or best offer PICKUP ONLY. If you have any other questions or interest, please contact me through here or the following: rosenoll2008@gmail.com 570-259-2008 (please leave a message as I get way too many junk calls any more) Thank you!

I was doing ALOT per month (both overall and custom) for many years until cancer entered my life. I spent most of 2016 not working (yes I pretty much depleted my business account) Now I'm back to quilting but nowhere what I did before. First of all I don't have the stamina because of Tamoxifen and cumulative effects even a year out and second sometimes I just don't want to. It's hard now as we will have 2 in college for almost the next 10 years, but at least I'm here for my family. Just think of what your priorities are at the present time and adjust them accordingly because life can change in an instant.

My machine is not available anymore.

I'm just bumping this to the top of the thread. It's still available and a waste to sit and not be used!

My machine is still available! I've had people ask about it, but it's for pickup only. I'm in central PA about 80 miles north of the capital of Harrisburg.

My machine is still available! I've had people ask about it, but it's for pickup only. I;m in central PA about 80 miles north of the capital Harrisburg.

Hi all, Here is the information on my machine that I'm selling. It is a 2010 Lenni on a 10' frame ( large enough to do up to queen). I'm the 3rd owner for this machine. I bought it near the end of 2010 from a lady in Boyertown, PA. She bought it to use it for personal use off a lady who bought it new from APQS to start a business I believe which didn't happen. She sold it because it was too much for her and she needed the room. I know she told me she had it serviced by the PA APQS rep before selling it to me. I bought this machine as a second machine ( I have an older Milie) with the intention of starting a long arm rental business in a rented place. That never worked out in this area. I had 2 ladies take beginning lessons on the machine (where I was with them continually) but then never had anyone rent time on it. So I used it to work on quilts the few days I was at my store since I use my Millie for everything. After I closed my store in the fall of 2013, I set the machine up at home in case I got custom quilts that needed to stay on my larger frame for a time so that I could work on other quilts. I did use it a bit, but not enough to warrant keeping it (a dozen or so quilts at the most). It has always been in a place where it was heated and air conditioned. I maintained it and oiled it when used. The past year especially it has not been used as I have been dealing with breast cancer since the beginning of the year. now that I'm getting back to somewhat normal and starting to get back to work, I realized that it's better to sell this machine to someone else. It works great. The only issue that I have had is that the turn knob brakes wore out and didn't grab anymore, so I bought the new pressure fit levers that came last week. So I need to switch them out. You can look on the APQS website for the specs on the machine which is close to my machine. I know they changed the handle design. I know I have an original brochure and picture somewhere that I can take a picture of and send to you if you like. I did update the table and carriage system sometime in 2011. You'll notice that 2 pictures in my store have a white table. The current table is black with one piece rails and an IQ carriage system. I didn't want to spend $3,000 to upgrade to the Bliss table and system and this was a less expensive alternative. It runs smoother that the original table and I haven't had problems with it. I will also include extras: - hook on the machine for hanging scissors -base extender for doing ruler work -micro handles for detail work -horizontal spool holder (on top of the machine to use spools instead of cones) -separate bobbin winder -1 dozen bobbins of 2 different types -3 new bobbin cases - 1 10 pack of needles -zippered leaders that I bought and attached with extra sets to attach your quilts to the frame easily I'm asking $6,000 for everything - pick up only. I don't want to ship it plus it would be expensive for the buyer. Please let me know if you have any other questions or want more picture of the carriage system etc.

This machine is still for sale. It works great and needs a new home!

Yes, it is!!

Hi all, Here is the information on my machine that I'm selling. It is a 2010 Lenni on a 10' frame ( large enough to do up to queen). I'm the 3rd owner for this machine. I bought it near the end of 2010 from a lady in Boyertown, PA. She bought it to use it for personal use off a lady who bought it new from APQS to start a business I believe which didn't happen. She sold it because it was too much for her and she needed the room. I know she told me she had it serviced by the PA APQS rep before selling it to me. I bought this machine as a second machine ( I have an older Milie) with the intention of starting a long arm rental business in a rented place. That never worked out in this area. I had 2 ladies take beginning lessons on the machine (where I was with them continually) but then never had anyone rent time on it. So I used it to work on quilts the few days I was at my store since I use my Millie for everything. After I closed my store in the fall of 2013, I set the machine up at home in case I got custom quilts that needed to stay on my larger frame for a time so that I could work on other quilts. I did use it a bit, but not enough to warrant keeping it (a dozen or so quilts at the most). It has always been in a place where it was heated and air conditioned. I maintained it and oiled it when used. The past year especially it has not been used as I have been dealing with breast cancer since the beginning of the year. now that I'm getting back to somewhat normal and starting to get back to work, I realized that it's better to sell this machine to someone else. It works great. The only issue that I have had is that the turn knob brakes wore out and didn't grab anymore, so I bought the new pressure fit levers that came last week. So I need to switch them out. You can look on the APQS website for the specs on the machine which is close to my machine. I know they changed the handle design. I know I have an original brochure and picture somewhere that I can take a picture of and send to you if you like. I did update the table and carriage system sometime in 2011. You'll notice that 2 pictures in my store have a white table. The current table is black with one piece rails and an IQ carriage system. I didn't want to spend $3,000 to upgrade to the Bliss table and system and this was a less expensive alternative. It runs smoother that the original table and I haven't had problems with it. I will also include extras: - hook on the machine for hanging scissors -base extender for doing ruler work -micro handles for detail work -horizontal spool holder (on top of the machine to use spools instead of cones) -separate bobbin winder -1 dozen bobbins of 2 different types -3 new bobbin cases - 1 10 pack of needles -zippered leaders that I bought and attached with extra sets to attach your quilts to the frame easily I'm asking $6,000 for everything - pick up only. I don't want to ship it plus it would be expensive for the buyer. Please let me know if you have any other questions or want more picture of the carriage system etc.

Hi all, I'm just getting feelers out there for now, but I will be selling my 2010 Lenni that was my second machine in the very near future. I'm waiting on the new braking system that I just ordered for it to come. As some of you may have remembered, I was diagnosed with breast cancer early this year and spent most of this year dealing with most of the "stuff" that comes with that. Now 2 major surgeries later, I'm finally going to force myself back to long arm quilting after Labor Day. But I have had this machine (I'm the 3rd owner) but it has only been lightly ( and I mean lightly used - maybe about 2 dozen quilts at the most). I will be putting up pictures, plus include some extras that I've added and upgraded. I would like to not ship it (I'm located in central PA, Elysburg, PA). It is a good machine and has worked very well for me. The knob brakes wore out, hence the reason I spent the money to put new ones on. For now you can email me rosenoll2008@gmail.com or message me on here ( I don't get on here much since breast cancer entered my life). Thank you all for thinking of me and praying for me over the past months. I'm trying to get back to "normal" . It's been quite a journey and eye opener.