[APQS used longarm machine]

Hi Beth,

Yes, a welding shop can cut down the aluminum table rails to whatever size and then they will also need to cut down the fabric rollers.  There is a hub welded into the ends of the steel pipe that can be taken out of one end, cut the pipe to match the table rails and then reweld the hub back into the end of the pipe.  Much cheaper than buying new pieces from APQS. 

[Innova 22 Longarm For Sale $15,000]

APQS Does allow any brand of long arm machine to be sold on this Forum.  I am watching to see if this person puts anything else suspicious on our forum.  So for now I am leaving this up.

[Lenni table with Bliss]

Hi SPI,

Yes, you can get the Lenni with an 8' table frame and have bliss on it too.  No cost difference from the 10' or 12' frames.  Let us know if we can help!

[Custom table length for Lenni?]

Hi mkc,

Yes, you can get an 11' table frame for the Lenni machine!  And the footprint that you talked about, 4'5" is just the machine's footprint.  We recommend a minimum of 2' on 3 sides of the table frame to be able to stand and operate the machine.  One end can go right up against a wall and leave the other end (2') to get front to back.  And yes, you can put casters or furniture glides under the feet to be able to move the frame around in your room if you are kind of tight front to back.  Hope that helps!