Search the Community

Hi folks! I just acquired a 2007 Lenni and am considering adding automation software to him. This is new to me so I’m in the research phase…Do I need to go with Quilt Path or can I use other software out there? Thanks in advance!

2007 Lenni for Sale with 10 foot table and EXTRAS! $5,000 I'm the 3rd owner for this machine. I bought it near the end of 2010 from a lady in Boyertown, PA. She bought it to use it for personal use off a lady who bought it new from APQS to start a business I believe which didn't happen. She sold it because it was too much for her and she needed the room. I know she told me she had it serviced by the PA APQS rep before selling it to me. . I had 2 or 3 people who took lessons on it with me, but then never rented time on it. So I have used it for some quilting while I had others on my large frame. It has been well maintained and used by me for maybe a few dozen quilts. I bought this machine as a second machine ( I have an older Milie) with the intention of starting a long arm rental business in a rented place. That never worked out in this area. I had 2 ladies take beginning lessons on the machine (where I was with them continually) but then never had anyone rent time on it. So I used it to work on quilts the few days I was at my store since I use my Millie for everything. After I closed my store in the fall of 2013, I set the machine up at home in case I got custom quilts that needed to stay on my larger frame for a time so that I could work on other quilts. I did use it a bit, but not enough to warrant keeping it (a dozen or so quilts at the most). It has always been in a place where it was heated and air conditioned. I maintained it and oiled it when used. The past year especially it has not been used as I have been dealing with breast cancer since the beginning of the year. now that I'm getting back to somewhat normal and starting to get back to work, I realized that it's better to sell this machine to someone else. You can look on the APQS website for the specs on the machine which is close to my machine. I know they changed the handle design. I know I have an original brochure and picture somewhere that I can take a picture of and send to you if you like. I did update the table and carriage system sometime in 2011. The current table is black with one piece rails and an IQ carriage system. I didn't want to spend $3,000 to upgrade to the Bliss table and system and this was a less expensive alternative. It runs smoother that the original table and I haven't had problems with it. When I closed my store and disassembled it, I set it up in my family room (first picture, machine on the left). I then took it down for space and later reset it back up in a spare room ( second picture). Then my son moved back in temporarily after college and down it came again. Now I don't want to reset it back up since I mainly use my large machine for the little quilting I still do. $5,000 Elysburg, PA FOR SALE APQS 2007 Lenni longarm quilting machine This is my SECOND long arm machine. For those of you that remember my store, this is the machine I had set up there. It is just sitting, having taken it apart last May after being reset back up in my home. It's a shame because it is a wonderful, high quality machine for someone. It is on a 10 foot table and includes extras such as the base for doing ruler work, zippered leaders with extra sets for quilts, a new brake system, horizontal spool holder, micro drive handles, extra bobbin cases and bobbins. The pictures show the last quilt I quilted on this machine and the machine on the left when it was set up in another room. I'm asking $5,000 PICKUP ONLY. If you have any other questions or interest, please contact me through here or the following: rosenoll2008@gmail.com 570-259-2008 (please leave a message as I get way too many junk calls any more) Thank you! Edited February 20, 2019 by NollR I provided additional information. 1 ORNurse56 reacted to this Quote Edit Roseann M. Noll Phoenix Rose Quilts Elysburg, PA Pellon Legacy Regional Long Arm Batting Distributor Check me out on Facebook under Phoenix Rose Q

SOLD I am leaving this post out here for others who are selling their machines to know what it went for. We did deliver and set-up the machine for her at that price. I purchased my Millenium in 2007. It has been gently used due to health issues. I added the Quilt Path in 2015 which made quilting much easier. Just load the top and let the computer do most of the work. Uses a Windows Surface Pro tablet to "drive the machine". This system will do KING size quilts. It has the Power Advance; with the touch of a foot the quilt will advance or reverse. There is an overhead bar to possibly install lighting. It has a great stitch regulator! Also, includes microhandles, a platform for ruler work and a Circle Lord system for the APQS. http://circlelordbasic.blogspot.com/ The laser pointer is also included for panto work and can be moved to the front of the machine, too. I have extra bobbin cases, thread, rulers, thread and miscellaneous items that will be included in the purchase. I have been asked if the machine has the Bliss Track System. It does not. But it does have the better wheels. The M&M wheels were added with the Quilt Path. They move much better than the original ones. From a quick search looks like they go for about $10,000 without the Quilt Path. It's another $10,000. I would be willing to start an asking price of $14,500 for all of it. Including delivery. I live in Las Vegas, Nevada. Price reduction on 01/11/2018 $13,000. This needs a new home. (It was purchased on 03/11/2018 for the @13,000 listed.) If you are interested, let me know. I am willing to negotiate! SOLD Mary B Email me at marobu@gmail.com or call or text me at 702-468-5489... My husband realized that the person buying the machine could live elsewhere and he excitedly said, "ROAD TRIP"! Don't let the location of the machine stop you from inquiring. For Sale: Gently Used 2007 Millennium with Quilt Path and 14' table SOLD SOLD