KerryM Posted October 25, 2008 Report Share Posted October 25, 2008 The weather turned nasty early this afternoon, so I headed to the Studio to give Missy her upgrade and play a bit. The crop feature is awesome. Nesting designs are no problem now. Top, Bottom or sides, this crop feature is...... WOOOOOOOW! I can't wait to paly some more and use some of the other new features! Link to comment Share on other sites More sharing options...
sewbobby Posted October 29, 2008 Report Share Posted October 29, 2008 Would someone mind measuring the distance between the 2 inside bars that the compuquilter can stitch without hitting the Y cordiance and let me know what it is? Thanks so much Link to comment Share on other sites More sharing options...
sewbobby Posted October 29, 2008 Report Share Posted October 29, 2008 Oh this is for the Millie owners Link to comment Share on other sites More sharing options...
yeoldeforest Posted October 30, 2008 Report Share Posted October 30, 2008 Not sure if this is what you are asking but we can stitch up to a 16 inch panto using CQ without an error msg. Link to comment Share on other sites More sharing options...
Sue E. Posted October 30, 2008 Report Share Posted October 30, 2008 I get about 14.5 inches that can be used to stitch out a design on my Millie w/the CQ. I believe the measure was a little wider but that is how my CQ was installed. I wish I had a little more space. Link to comment Share on other sites More sharing options...
KerryM Posted October 30, 2008 Author Report Share Posted October 30, 2008 I just finished a panto and managed to get 17", not much room left after that. It sounds like each machine is a little different. Maybe it depends on the person who sets it up. Tina Collins did my complete setup. Link to comment Share on other sites More sharing options...
nineva Posted October 30, 2008 Report Share Posted October 30, 2008 Hey Sue, I heard there is a way to adjust the x limits by moving the little stopper thingey. I am going to figure it out as too many times I just need one more inch to be able to do two runs without rolling my quilt. Seems silly to have to roll after an 8" run, eh?? Maybe someone else can pop in here and tell us how to do it. Nancy Link to comment Share on other sites More sharing options...
sewbobby Posted October 30, 2008 Report Share Posted October 30, 2008 Thanks for your help, I think the max I can get is about 12" I think my frame is made differently I'm going to give Dave a call I just asumed when he sold it to me it was regulation size. Dave made my table and it is beautiful but sure would like it to be the same size as the one that is sold with the machine. Thanks Barb Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.