amyfaith Posted February 11, 2009 Report Share Posted February 11, 2009 I was going along in stitch regulator mode and my Millie just stopped stitching. I have checked all of the wire connections and turned the machine on and off, but it will not stitch in manual or regulated mode. Both chanel locks are responding, thread cutter is working, and the single stitch function is working. I am going to get a call in to Amy tomorrow, but I teach during the day and am afraid I will not be able to talk to her while standing next to the machine. Has anyone had this same problem that could tell me what they found the problem to be? I am trying not to panic with a customer quilt only partially finished and 4 more in line. Thanks for any advice! =0) Amy Link to comment Share on other sites More sharing options...
IQ'd Posted February 11, 2009 Report Share Posted February 11, 2009 Have you tried to change the fuse? Link to comment Share on other sites More sharing options...
amyfaith Posted February 13, 2009 Author Report Share Posted February 13, 2009 If any of you ever have the same problem I described in my previous post...the motherboard and daughterboard both have to be replaced. Thank the Lord for Mark sending the Amazing Connie Keller to rescue my Millie! Amy Link to comment Share on other sites More sharing options...
mark Posted February 13, 2009 Report Share Posted February 13, 2009 Great news Amy!! Glad that did the trick...and yes, Connie is awesome!! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.