frogteacher Posted June 7, 2009 Report Share Posted June 7, 2009 Lenni keeps on stitching when turned off with white or green button. Does this in regulated or manual mode. Tried all the obvious cleaning,etc. What to do?? Has anyone ever had this? Link to comment Share on other sites More sharing options...
smorris Posted June 7, 2009 Report Share Posted June 7, 2009 Hi Does it keep stitching until you unplug the power cord, or does it take may 5 or 6 stitches and then stop. If its the latter make the needle positioner adjustment as described in the manual. sue in australia Link to comment Share on other sites More sharing options...
frogteacher Posted June 7, 2009 Author Report Share Posted June 7, 2009 Hi Sue, It may stitch 6-8 times and sometimes more. I will try the needle positioner method and see what happens. I did a search for similar problems and found a few that seem to point to a blue button #8 adjustment. I don't think that Lenni was around when those questions were asked, so don't know if Lenni has a blue button. If your solution doesn't work I will call tech support tomorrow. Thank you, Nancy Lubbock, Texas Link to comment Share on other sites More sharing options...
roberta Posted June 8, 2009 Report Share Posted June 8, 2009 This sounds like a problem I had a while back. Here is the thread. I had some great advice and got my problem fixed really fast with Amy's help. I still have her instructions if you think you might need them, but I would run them by Amy first. http://www.apqs.com/quiltboard/viewthread.php?tid=14048&page=1#pid146072 Link to comment Share on other sites More sharing options...
smorris Posted June 8, 2009 Report Share Posted June 8, 2009 Hi Nancy If its only runing 6-8 stitches then adjusting the needle positioner through the back plate of the machine, after its well warmed up will work. If that doesn't fix it there is another needle positoner on a different board on the Lennis and you are right the blue capacitor isn't for the Lennis Good luck sue in Australia Link to comment Share on other sites More sharing options...
WendyJ Posted June 8, 2009 Report Share Posted June 8, 2009 Hi Nancy, I had a similar problem with my new millenium. Please call Amy at APQS, she can guide you through the possible options. The people of APQS are of great help. Good luck, Wendy Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.