AnnHenry Posted August 17, 2009 Report Share Posted August 17, 2009 Put only a drop in the bobbin when I changed bobbins, and did run the machine, but didn't run extra after putting the bobbin in, and this is the result . . . What can I do? Thanks for help. Link to comment Share on other sites More sharing options...
ffq-lar Posted August 17, 2009 Report Share Posted August 17, 2009 Dip a cotton swab in baking soda and load up the line of stitching. Really pile it on. Let it sit for a while--even overnight. The baking soda will do no harm. Brush or vacuum off and it should be gone. Link to comment Share on other sites More sharing options...
Nadia Wilson Posted August 17, 2009 Report Share Posted August 17, 2009 Cornstarch works too, same method as Linda says above. I also read somewhere that baby powder works too..... Cheers, Nadia Link to comment Share on other sites More sharing options...
matildanme Posted August 17, 2009 Report Share Posted August 17, 2009 I've used talcom powder and it works too good luck cheers Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.