Guest The Quilting Diva Posted September 9, 2009 Report Share Posted September 9, 2009 Ok, I know there have been some discussions regarding downsizing our rails. I have 14' and want to go to 10'. What can you recommend? Cynthia Link to comment Share on other sites More sharing options...
smorris Posted September 9, 2009 Report Share Posted September 9, 2009 Hi Cynthia i'd call the factory on this one, the tables have changed over the years - regarding placement of crossways cylinders and locking mechanism at the end of the rollers. sue in australia Link to comment Share on other sites More sharing options...
Susanne.Hughes Posted September 9, 2009 Report Share Posted September 9, 2009 Hello Cynthia, I think this was the latest discussion http://www.apqs.com/quiltboard/viewthread.php?tid=18251 Hope this helps. Regards, Link to comment Share on other sites More sharing options...
Guest The Quilting Diva Posted September 10, 2009 Report Share Posted September 10, 2009 Thanks, Susanne. I found the info. Sounds like it could be done. The trade would cost me $1100+ shipping... cynthia Link to comment Share on other sites More sharing options...
John Mitchell Posted September 11, 2009 Report Share Posted September 11, 2009 You might find someone that has a 10 foot table to trade. We have one that we would sell. John Link to comment Share on other sites More sharing options...
Gator Posted September 11, 2009 Report Share Posted September 11, 2009 Anything is possible but you're talking about a lot of work and remember the table has to be level in the end. I worked with metals for 27 years in the Navy and aluminium is especially difficult to work. I bet someone would trade you. Link to comment Share on other sites More sharing options...
carmen Posted September 11, 2009 Report Share Posted September 11, 2009 Hi Cynthia, I just send you an E-Mail Carmen Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.