The Crafty Unicorn Posted April 25, 2011 Report Share Posted April 25, 2011 My friend and I are going to look at a used machine on Thursday. In case it comes home with us...Any hints on breaking down the old style wooden tables? Hidden or hard to reach bolts? Tips like "loosen this first" would be apreciated. Link to comment Share on other sites More sharing options...
zeke Posted April 25, 2011 Report Share Posted April 25, 2011 Actually there aren't. What you see, is what you get. Nothing hidden on these tables. You'll be hauling a table that is wood and 12' long. All you have to do is unbolt the legs and you're ready to go. Make sure that you use masking tape to mark where the side supports go when taking them off. This way you'll be able to put them back at the same height use you remount them. The height is very important for the take up in the throat of the machine. zeke.......... Link to comment Share on other sites More sharing options...
The Crafty Unicorn Posted April 25, 2011 Author Report Share Posted April 25, 2011 Thanks. It may be a long ride home... Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.