tracyv Posted July 13, 2011 Report Share Posted July 13, 2011 Have been crazy busy and haven't quilted in a month. Got my quilt all loaded, and was happily stitching away, but the stitch regulator kept cutting out. Would take 3-4 really big stitches, and then stop. It probably did it 20 times in the last 10" of the quilt. Suggestions of what the problem is and what I should try first? Link to comment Share on other sites More sharing options...
Janette Posted July 13, 2011 Report Share Posted July 13, 2011 check the stitch regulator cable is connected OK. I had the same problem and ended up with a replacement cable. Link to comment Share on other sites More sharing options...
Primitive1 Posted July 13, 2011 Report Share Posted July 13, 2011 Make sure that all of your wheels are making good contact. Is it only going side to side or back and forth. If so then try switching cables to see if it is on of the boxes that is bad or a cable. You can call APQS and they will walk you through some things to try to see if you need to replace something.... Link to comment Share on other sites More sharing options...
tracyv Posted July 16, 2011 Author Report Share Posted July 16, 2011 Thanks for the advice! Checked the cables, and it works perfectly now! Can't believe I couldn't figure it out on my own! Duh! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.