Jump to content

Lenni Died


Recommended Posts

Up to this point I have cleaned the fly wheel no thread very little dust. All the connections are connected. I have taken the cover off the motor. The wheel on the front of the motor goes but the belt does not move. With or without the stitch buttons green/white on. I can move the needle up and down by turning the fly wheel by hand. I also checked the bushings and the fuse.

Any other ideas? I have one more row on rush quilt. Lite comes on so I have power.

Thanks

Barb/VT

Link to comment
Share on other sites

  • 11 months later...

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...