BobbieJones Posted April 22, 2012 Report Share Posted April 22, 2012 I'm having a problem with the bobbin thread showing only at the points. I have a batik top and bottom with QD bamboo batting and I'm using Rainbow on top and prewound bottom line in the bobbin. Perfect tension except for those darn points - help. Thank you. Link to comment Share on other sites More sharing options...
GeoTech Posted April 22, 2012 Report Share Posted April 22, 2012 Tighten your bobbin a scootch. If you are still getting the bobbin thread on the points then loosen your top thread by a 1/4 turn on the top tensioner. Link to comment Share on other sites More sharing options...
cmoore1223 Posted April 22, 2012 Report Share Posted April 22, 2012 Hesitate just a beat at the points and give the machine time before you head off in the other direction. Link to comment Share on other sites More sharing options...
BobbieJones Posted April 22, 2012 Author Report Share Posted April 22, 2012 Thank you so much for all of the help. I actually did what both of you advised and it appears to have solved my problem. The combination that I'm working with right now always seems to give me a challenge. Thanks again. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.