gin Posted February 2, 2013 Report Share Posted February 2, 2013 I have a Freedom 2012. We aregoing to replace the gear, but We can't take off the gearbox face. I remove 4 black headed screws, black cap, on the throat of the machine right behined the screw and silicone sealant. I used screwdrive to pry face of gearbox away but It is really hard.We tried two hours but it is not take off. I have a instruction with pictures. We tried correctly. English is my second language, so please forgive me for any mistakes grammar. Any help would be appreciated. Link to comment Share on other sites More sharing options...
DawnCavanaugh Posted February 2, 2013 Report Share Posted February 2, 2013 Hello Gin, I am sorry you are struggling with the gearbox face plate. It is late Friday night in Iowa, but I will try to see if Amy, our service technician, can offer any help tomorrow morning either by email or on our Forum. Link to comment Share on other sites More sharing options...
gin Posted February 2, 2013 Author Report Share Posted February 2, 2013 Hi, Dawn thank you for your help. Amy sent the gear very quickly. Thank you Amy!! I'm waiting her reply. Thanks, Link to comment Share on other sites More sharing options...
DawnCavanaugh Posted February 3, 2013 Report Share Posted February 3, 2013 Gin, I just sent you an email with additional instructions Amy has texted to me. She will be back in the factory on Monday if you need additional help. She is the "expert" on gearboxes. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.