Jump to content

My Mini Extended Base


Recommended Posts

I wanted a small extended base to do some circle work on quilt.  I have a 15" x 18" that was too big for this project.

 

So I made one out of the matting board that goes behind tapestries,or embroideries when you frame them.

 

Took off the needle plate, traced it on the board, cut the board with a sharp knife,  smoothed the edges by rubbing them against the edge of my cutting mat. Then I have just Duct Taped it to my machine.post-2934-0-31766200-1371542874_thumb.jpg

It is only 4 1/2" x 7" so will be perfect for the 2 1/2" circle I want to stitch around.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...