djgreenway Posted November 24, 2013 Report Share Posted November 24, 2013 I am using a pantograph for the first time on my Millie. I see there is a place to attach it on top, and what looks like at the rear right side, horizontally. I suppose the pantograph can only be loaded in back, but when I try to load it on that horizontal rod, it won't grip tightly and swings all over. How do I do this correctly? Link to comment Share on other sites More sharing options...
Busy Quilting Posted November 24, 2013 Report Share Posted November 24, 2013 I had to find my stylus first to have a play with it. I don't use it often at all. The black circular knob can be used to ktighten the mounting on the laser post. It can also be pushed in so that you can slip the hole over the post it then grips the post better for you to tighten it. Link to comment Share on other sites More sharing options...
djgreenway Posted November 24, 2013 Author Report Share Posted November 24, 2013 Thank you for your response. I know what you are talking about and can mount it through that hole, but the screw will not tighten it. It will only screw in enough to get close but not snug. Link to comment Share on other sites More sharing options...
meg Posted November 24, 2013 Report Share Posted November 24, 2013 Are you tightening it when it's on the post or before putting it on? I tighten mine before putting it on. I adjust it so I have to squeeze it to get iton. Then, when I stop squeezing, it stays put. If I need to adjust it, I squeeze it to turn it. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.