JeannieB 155 Report post Posted June 17, 2014 What temperature setting do you use to fuse 911FF pelon to a tshirt back? And for how many seconds do you clamp the heat press down on the tshirt/pellon? do you use a different temperature/time for sweatshirts? just want to be somewhat prepared for my first attempt at using a heat press!!! thanks for your help! 8-) Quote Blessed, Blissed and Gliding with Millie and QP! www.NoThimbles.com Share this post Link to post Share on other sites
micajah 152 Report post Posted June 17, 2014 Hi Jeannie, I use the 906fw1 inferfacing and my settings are 300 degrees F and time is 10 seconds. Debbie forgot your sweatshirt question....the one time I had to do sweatshirts, it took 2 tries, the second time after the shirt cooled down. 1 JeannieB reacted to this Quote Debbie Jackson, Ga. Share this post Link to post Share on other sites
BethDurand 350 Report post Posted June 17, 2014 I set my press on high, and leave the clamp down until the alarm goes off. Never had a problem with anything not fusing. 1 JeannieB reacted to this Quote Beth Durand Elizabeth Originals Custom Quilting www.eocquilting.com beth@eocquilting.com 2006 APQS Millenium Authorized APQS Dealer Share this post Link to post Share on other sites
wreckser 2 Report post Posted June 17, 2014 I also use 300 degrees, 10 seconds. Same for sweatshirts. Love the press! 1 JeannieB reacted to this Quote Wreckser Flying S Quiltworks Marcel, our 2009 Millie Share this post Link to post Share on other sites
whitepinesquilter 367 Report post Posted June 18, 2014 Mine will be anywhere between 310-325 for 10 seconds. Just love using the press with interfaced blocks 1 JeannieB reacted to this Quote 2009 Freedom, and a 1989 Ulti I w/Intellistitch Share this post Link to post Share on other sites
