chickenscratch Posted November 16, 2014 Report Share Posted November 16, 2014 This has been addressed before, but I thought I'd give it another shot. If anybody has upgraded to Bliss and their table is in excellent shape I would like to purchase the long rails from you. OR if APQS has any that are leftover from somebody's Bliss upgrade. I don't have a terrible huge amount of money to spend, but this seems to be the only thing that will make my machine manageable. Link to comment Share on other sites More sharing options...
jimerickson Posted November 16, 2014 Report Share Posted November 16, 2014 Teresa: I think you should take a hard look at your wheels before you invest in a new table. Buy yourself a set of Edgeriders first. Even if it's not your wheels, the new set will be a great addition to a new table. For $170 you can at least eliminate bad wheels from the equation, and you just might solve the problem. Either way it's a good investment. Please send me photos of your current wheels and table tracks. I might see something you're missing. There was a world of difference in how both of my machines preformed when the stock wheels were replaced with after market sets. Jim Link to comment Share on other sites More sharing options...
chickenscratch Posted November 16, 2014 Author Report Share Posted November 16, 2014 We know the table has damage. It has big dents in it from being moved from Iowa to here in the back of a pickup truck. After I finish this quilt i plan to take all the wheels off and clean them really well and see if they have any bad spots on them. They are the M and M wheels, I found out. I can't get edgeriders for the Lenni. I have asked several sellers and sent an email to Edgerider, with no answer. Link to comment Share on other sites More sharing options...
jimerickson Posted November 16, 2014 Report Share Posted November 16, 2014 Are you sure they're M&M? I didn't think that APQS made M&M's for anything but their horizontal system. Either way, please send me photos. I've had quite a bit of experience studying Longarm wheel systems. I'm afraid that just looking at the wheel for damage won't tell you if they're bad. Neither my Ult2 nor my Gammill Clasic showed evidence of wheel damage, but replacing them made all the difference in the world. (it was part worn wheels, but mostly inferior design and construction) I might have an Edgrider wheel solution for you, but I need to see what your tracks look like. Jim Link to comment Share on other sites More sharing options...
RunningThreads Posted November 16, 2014 Report Share Posted November 16, 2014 Jim PM sent. Nigel Link to comment Share on other sites More sharing options...
chickenscratch Posted November 16, 2014 Author Report Share Posted November 16, 2014 Jim, thanks for all your help. As soon as I get this quilt off I will send you some pictures. It will be later this afternoon. I have one more border to go. I appreciate your willingness to help. I hope you have a solution for me. Link to comment Share on other sites More sharing options...
chickenscratch Posted November 16, 2014 Author Report Share Posted November 16, 2014 Jim, I emailed you the pictures. I hope that I had your correct email adddress. Thanks Link to comment Share on other sites More sharing options...
jimerickson Posted November 17, 2014 Report Share Posted November 17, 2014 Teresa: If you used the e-mail address that in my member profile, it is correct, but I just checked my e-mails, and there isn't any from you. For your info, my e-mail is: jimatthelake903@gmail.com Jim Link to comment Share on other sites More sharing options...
chickenscratch Posted November 17, 2014 Author Report Share Posted November 17, 2014 check again Jim. I sent it to yahoo.com instead of gmail.com. You should have it now. Link to comment Share on other sites More sharing options...
chickenscratch Posted December 21, 2014 Author Report Share Posted December 21, 2014 My husband is so smart. He thought about it a while and then said,"they are L shaped aren't they?" "Yes," I replied. "So why can't we just flip them and drill new holes for the bolts?" (See I told you he was smart) SO, that's what he spent yesterday doing. It took a very long time to drill 12 holes in that hard steel, but he got it done. We squared and leveled the table last night. We have to finish putting it together today. I also spent a couple hours last night trying to make sure the wheel rode dead center on the rails. I hope I've got it right. It does seem to roll better now. I pushed it from one end of the table to the other and it went about half way before stopping. That was an empty carriage. I will let you know it things are better once we get the machine head on and I start quilting. Link to comment Share on other sites More sharing options...
Beachside Quilter Posted December 21, 2014 Report Share Posted December 21, 2014 Awesome, Teresa! I hope you have found a solution! Best of luck in getting it all back together. Hope it glides smoothly for you so you can get back to your beautiful quilting! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.