What am I doing wrong?!

[LucyPrairie]

I've been using QP to work on a client's quilt.  I've been doing each individual triangle. I am about 2/3 of the way finished with the quilt.  However, after finishing the last wedge something happened and I don't know what.  Here are the things I did differently:  NOTHING.!  I did not scroll the quilt.  I didn't adjust the tension or change thread.  I didn't close QP down or restart the machine.  

 

The first time I tried to do the next wedge in QP the needle wouldn't raise on its own and I had to manually raise it.  Next time I tried to use QP the needle actually broke.  At that point I powered everything down, replaced the needle, cleaned, checked the bobbin case to make sure everything looked good.  Tried again with QP.  This time the needle bar wouldn't raise again and QP wouldn't respond to any stop command which almost resulted in ripping a gigantic hole in the top of a client's quilt.  So I started to think it was QP.  Once again, I powered everything off and checked things out.  

 

Ran the machine without a needle to see if there was a problem and things looked good.  Inserted a needle and tried to stitch a swatch on the side of the quilt and all heck broke loose.  Here's what I've got:  The first is what it looked like when I tried to stitch the swatch.  The second is what it looks like on the bottom side.  

 

What is really throwing me for a loop is that I didn't do anything different.  Anyone know what happened or how to fix it?  I'm running a Freddie with all the bells and whistles.  Glide is in the top and Glide Magna Classic is in the bottom.  

 

 

I've got to get it figured out because I'm at capacity.  I'm having to turn business away because I'm so backed up.