Recommended Posts

Pull the top thread through the eye of the needle and look at the tension check spring.  It should pull down to about  9 O'clock if it is pulling tighter   to 8 0r 7 O'clock you then need to loosen off your top tension.


You will need a tail on your bobbin thread of about 4".


If you take off your throat plate and  needle up down you may find where the top thread is hanging up, it could be in the bobbin finger - the thingamajig that stops  the whole bobbin assembly from free wheeling - it should only  be 1/3 rd of the way into the hole.  All this is in the manual.

Lyn Crump   Hand Guided 2013 Millenium Blissed and Gliding    APQS Sales Rep SE Qld Australia   On Facebook and Instagram as BusyQuilting

Attitude is everything - So pick a good one!

Share this post

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this