start up machine needle won't stop moving


Recommended Posts

When I start my Millie the Needle never stops.  The system comes up in stich regulator mode, with the needle up posiition but the needle keeps moving. I can stop the needle by setting Needle down.  I have tried adjusting the little screw at the back of the machine but no luck. Looking for ideas thanks

Link to post
Share on other sites

Email to service@apqs.com, marked "high priority," and follow up with a call to them first thing on Monday morning.  Describe everything you've experienced and everything you've checked/done, so they know what comes next.  Most likely, it's a board issue, but they'll be able to walk you through a diagnosis.  You may even get an email back from Dawn Cavanaugh before the weekend is out.

 

Once APQS figures out your issue, please come back here and post the resolution, so that those who experience this in the future will know what to look for!

Link to post
Share on other sites
  • 3 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...