Memory Quilter Posted April 22, 2016 Report Share Posted April 22, 2016 How do you get out of simulation mode? Link to comment Share on other sites More sharing options...
HeidiP Posted April 22, 2016 Report Share Posted April 22, 2016 Turn your tablet, your machine and your carriage off. Tighten the clamps and turn everything back on, first the carriage, then the machine and last the tablet. The tablet will recognize it's connected and ask you to have the needle raised so it can test the horizontal and vertical belts. If the machine doesn't move forward and to the left, recheck that your belt clamps are up and then some. If it moves, you're good to go! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.