LisaFox Posted June 3, 2016 Report Share Posted June 3, 2016 APQS Ultimate II (20 inch throat space) with 12 foot wood and steel table. Stylus pointer for pantographs along with factory laser. Original stand alone bobbin winder and extra bobbins. 3 huge spools of invisible monofilament thread and many many prewound bobbins. Also has Hartley fence for perfect circles and diagonals. Leaders and clear pantograph plastic still look like new. Have original instruction manuals and VCR tapes for set up. This machine is a work horse and will sew forever. Everything you need to setup and start quilting. Located 30 miles from DesMoines Iowa.Everything on this machine works well and it is set up so you can test drive.Asking $2900.00 Link to comment Share on other sites More sharing options...
Sheri Butler Posted June 4, 2016 Report Share Posted June 4, 2016 Lisa, let the new owner or prospective buyers know that I sell the 1/2" foot for the Ult II machine, so they can use ALL the rulers on the market with that foot!!! My contact info is below my signed name. Link to comment Share on other sites More sharing options...
jcox1040 Posted June 9, 2016 Report Share Posted June 9, 2016 Is this machine stitch regulated? Link to comment Share on other sites More sharing options...
jimerickson Posted June 9, 2016 Report Share Posted June 9, 2016 jcox: I'm not the owner, but the answer to your question is no. Sometimes folks who post here, especially if they aren't a regular member, don't follow closely and answer questions. Jim Link to comment Share on other sites More sharing options...
LisaFox Posted June 9, 2016 Author Report Share Posted June 9, 2016 Thank You for the help Jim Lisa Link to comment Share on other sites More sharing options...
Cagey Posted June 9, 2016 Report Share Posted June 9, 2016 Sheri: When you say you sell the foot for the Ult II, do you also sell the little plastic attachment that allows you to safely use rulers with an old model George? Cagey Link to comment Share on other sites More sharing options...
Abercroft Posted June 10, 2016 Report Share Posted June 10, 2016 Hi, Is this machine still available? Would you ship. If not could you wait until the middle of August for me to pick it up? Thanks, Sarah Link to comment Share on other sites More sharing options...
LisaFox Posted June 10, 2016 Author Report Share Posted June 10, 2016 Sarah Sent you a PM Lisa Link to comment Share on other sites More sharing options...
Sheri Butler Posted June 11, 2016 Report Share Posted June 11, 2016 Sheri: When you say you sell the foot for the Ult II, do you also sell the little plastic attachment that allows you to safely use rulers with an old model George? Cagey No I'm sorry Cagey, I just sell the replacement foot for the ULT II's. Link to comment Share on other sites More sharing options...
Cagey Posted June 11, 2016 Report Share Posted June 11, 2016 Sheri: Thank you. I know they used to make and or sell a plastic insert for George's thin flat hopping foot, but I have been unable to find it. Take care, and have a great day. Cagey Link to comment Share on other sites More sharing options...
Sheri Butler Posted June 12, 2016 Report Share Posted June 12, 2016 Sheri: Thank you. I know they used to make and or sell a plastic insert for George's thin flat hopping foot, but I have been unable to find it. Take care, and have a great day. Cagey Cagey, send me a pic of your old George foot. Is it the spoon foot like the ULT II's? I'm curious now. 1sheributler@gmail.com Link to comment Share on other sites More sharing options...
sherdonnelly Posted June 16, 2016 Report Share Posted June 16, 2016 Is this machine still available? I am very interested. Link to comment Share on other sites More sharing options...
LisaFox Posted June 16, 2016 Author Report Share Posted June 16, 2016 Yes it is Link to comment Share on other sites More sharing options...
Cagey Posted June 18, 2016 Report Share Posted June 18, 2016 Sheri: This is the foot on my George. Cagey Link to comment Share on other sites More sharing options...
CBing Posted June 28, 2016 Report Share Posted June 28, 2016 Can a stitch regulator be added? I looked into Intellistitch but web site says it's not available in My state. There are only a handful of states for availability. Who else can can I get one from? Link to comment Share on other sites More sharing options...
CBing Posted June 28, 2016 Report Share Posted June 28, 2016 Can a stitch regulator be added? I looked into Intellistitch but web site says it's not available in My state. There are only a handful of states for availability. Who else can can I get one from? Link to comment Share on other sites More sharing options...
jgardog Posted June 28, 2016 Report Share Posted June 28, 2016 I think Nolting can still put one on at their factory for you. Contact Dan Terrill. Link to comment Share on other sites More sharing options...
Battynurse Posted June 29, 2016 Report Share Posted June 29, 2016 I have an ultimate II and was told by Dave Jones that yes an intellistitch stitch regulator could be added. Link to comment Share on other sites More sharing options...
sherdonnelly Posted July 2, 2016 Report Share Posted July 2, 2016 Is this machine still available? Link to comment Share on other sites More sharing options...
sherdonnelly Posted July 6, 2016 Report Share Posted July 6, 2016 I was all set to buy a Discovery (same as the Ultimate II) until I researched the cost of adding the stitch regulator. It's roughly $4000 to add. Link to comment Share on other sites More sharing options...
jgardog Posted July 6, 2016 Report Share Posted July 6, 2016 Nolting said it was only $2700. Link to comment Share on other sites More sharing options...
LisaFox Posted July 6, 2016 Author Report Share Posted July 6, 2016 Yes machine is still available Lisa Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.