Recommended Posts

Seems I just didn't have the needle inserted all the way....jeesh....

 

 

I have Lucey with M bobbin...I am not sure what needles I should be using. I purchased the machine used, and the needles that were included are GrozBeckert 10 Nm 110/18 134MR 1955MR 134 SAN11 DP X 5 MR. When I put one of these in, press the needle down to pull up my bobbin thread, it 'jams' in the hole, the machine hums, and I have to turn off the power and use the hand wheel to bring the needle back up. Can you tell me, is there something I am doing wrong? Is this the right needle?  I think now I have in a needle that I used when I had my Lenni with L bobbin, not sure the brand but they say 1955-01-MR4.5 SET/R 134 135X5 797 DPX5. I know the 4.5 is larger than I want to be using, but it's all I have other than the GB needles. Thanks for any help you can be!

 

Dara in IA

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...